Citizen Line Thermal Printer Specifications, Connector’s Pin Configurations, Drive Circuit

iDP-3210 User’s Manual idp-3210 User's Manual

7. Drawer Kickout Connector

7.1Specifications

(1)Drawer-Kick Drive Signal

Pulses specified by ESCp are output. Also, SW(+) state, in parallel interface, can be observed by Pin 34 of the interface connector and, in serial interface, by ESC u command.

(2)Electrical Characteristics

1)Drive voltage : DC24V

2)Drive current : Max. 0.8A (within 510ms)

3) SW signal	: signal level "L"= 0~0.5V
	"H"= 3~5V

7.2 Connector’s Pin Configurations

No.	SIGNAL NAME	FUNCTION
1	FG	Frame ground
2	DRAWER 1	Drawer 1 driving signal
3	DRSW	Drawer SW input
4	VDR	Drawer driving power supply
5	DRAWER 2	Drawer 2 driving signal
6	GND	Common ground on the circuits

Connector used : TM5RJ3-66 (Hirose) or equivalent

Applicable connector : TM3P-66P (Hirose) or equivalent

Caution

1)No output is available during printing.

2)Drawer 1 and Drawer 2 can not be driven simultaneously.

3)Use a solenoid of 36 XXXOLMS or more for the drawer. Do not exceed 0.8A for output current. Failure or seizure can take place.

4)No connection is available to a to a telephone line.

7.3Drive Circuit

8 POWER SUPPLY CONNECTOR SPECIFICATIONS

This is the connector for power supply from exclusive AC Adapter.

43/67 CITIZEN