Citizen Line Thermal Printer, iDP-3210 user manual Command List, 45/67 Citizen, Esc Sp, Esc =

				iDP-3210 User’s Manual
				idp-3210 User's Manual
9 PRINT CONTROL FUNCTION
9.1 Command List
		CONTROL CODE	FUNCTION		PAGE
	1	HT	Horizontal tab command
	2	CR	Print command
	3	LF	Printing and paper feed
	4	ESC SP	Setting the right space amount of the character
	5	!	Collective specifying printing mode
	6	%	Specifying/canceling download character set
	7	&	Defining download characters
	8	*	Specifying the bit image mode
	9	-	Specifying/canceling underline
	10	2	Specifying 1/6-inch line feed rate
	11	3	Setting line feed rate n/203 inch
	12	@	Initializing the Printer
	13	D	Setting horizontal tab position
	14	E	Specifying/canceling highlighting
	15	G	Specifying/canceling double printing
	16	J	Printing and feeds paper n/203 inch
	17	R	Selecting the international characters
	18	c3	Setting of paper end sensor effective for outputting a signal for no
			paper(Parallel Mode Only)
	19	c4	Setting of paper end sensor effective for print stop
	20	c5	Enabling/disabling the panel switches
	21	d	Printing and feeding the paper by n lines
	22	p	Generating the specified pulse(Drawer Kickout)
	23	t	Selecting the character code table
	24	v	Transmitting the printer status(Serial Mode Only)
	25	u	Transmitting the status of peripheral equipment(Serial Mode Only)
	26	{	Specifying/canceling the inverted characters
	27	V	Specifying/canceling the 90°- right-turned characters
	28	$	Specifying the absolute positions
	29	\	Specifying the relative positions
	30	GS k	Printing the bar code
	31	w	Selecting the horizontal size (scale factor) of bar code
	32	h	Selecting the height of the bar code
	33	H	Selecting the font of HRI character
	34	*	Defining the download bit image
	35	/	Printing the download bit image
	36	:	Starting/ending macro definition
	37	^	Executing the macro
	38	ESC =	Data input control
	39	a	Aligning the characters
	40	i	Full cut

45/67 CITIZEN