4.4 Inserting the Paper Roll
Cautions : Do not use a paper roll other than the one specified in this manual. In case of using a paper roll other than the one specified, there is a case the print quality and reliability may not be guaranteed.
(1)Holding the projections on both sides of the printer cover, open it until it stops.
Cautions : The printer cover is not detachable. Do not try to further open beyond the stop position. Do not insert the paper roll with its end fluffed or bent.
(2)Cut the end of paper roll approximately at a right angle.
Cautions : Do not insert the paper roll with its end fluffed or bent.
Good | Good | Good | No Good | No Good | No Good |
(3)Confirming winding direction of the paper roll, put it on the roller section of the upper cover.
(4)Turn ON the power switch.
(5)Insert the tip of the paper roll straight into the paper inlet (as indicated by an arrow on the case).
(6)Paper is automatically pulled into the platen roller and comes out of the paper outlet. As excessive portion of paper is automatically cut off, remove it away.
(7)With the printer cover closed, printer is ready to print.