(14) Specifying/canceling highlighting (ESC E n)
Code : [1B]h + [45]h + n
*{0 is less than or equal to n is less than or equal to FF} Data is described in Hex code. Specifying/canceling the highlighted characters.
"n" is valid only for the lowest bit (n0).
*Control by the lowest bit (n0) is shown as follows:
n0 | Type |
0Canceling highlighting.
1Specifying highlighting.
•This is effective to all characters.
•Dot configuration of a highlighted character includes one extra dot added at its side.
(15)Specifying/canceling Double Printing (ESC G n)
Code : [1B]h + [47]h + n
*{0 is less than or equal to n is less than or equal to FF} Data is described in Hex code. Specifying/canceling the double printing.
• "n" is valid only for the lowest bit (n0).
• Control by n is shown as follows.
n0 | Type |
0Canceling double printing.
1Specifying double printing.
•The print result of Double printing and highlight character printing is completely same
(16)Printing and feeding paper n/203 inch (ESC J n)
Code : [1B]h + [4A]h + n
{0 is less than or equal to n is less than or equal to FF} Data is described in Hex code. Prints data inside the print buffer and feeds paper by n/156 inch.
•Specified volume does not remain.
•The beginning of the line is to be considered as the next printing start position.