2. GENERAL SPECIFICATIONS
Feature | Parameters |
Printing system | Direct thermal printing |
Printing speed | 50 mm/sec |
Printing head | Total dots: 384 |
| Dot density: 8 dots/mm |
| Printing width: 48 mm |
Emulation | ESC/POS commands plus extra commands for |
| specific printer features |
Characters | ASCII Code, Alphanumeric characters, |
| International characters, Windows Code page |
Characters per line | FONT A: 32 characters/line, FONT B: 42 characters/line |
Dot matrix | FONT A: 12H ⋅ 24V, FONT B: 9H ⋅ 16V |
Bar code type | |
| CODE39, CODE128, CODABAR, CODE93 |
Paper feed system | Friction feed |
Paper width | 58 ±0.5 mm |
Paper thickness | 60 - 65 ∝m |
Recommended paper | |
Paper roll maximum diameter | 40 mm |
Minimum core diameter | 8 mm |
Interfaces | IrDA version 1.0 |
| Bluetooth version 1.2 |
| Serial interface (by serial cable - option) |
IrDA interface | Mode: Infrared transceiver mode |
| Transport wave: Wave length - 850 to 900 nm |
| Communication speed: 9600, 19200, 38400, 57600, |
| 115200 bps |
| Data length: 8 bits |
| Start bit: 1 bit |
| Stop bit: 1 bit |
| Parity: none |
| Communication: Half duplex |
| Flow control: IrDA standard |
| Communication distance: Max. 80 cm |
| Supported protocol: IrComm 3 wire raw/IrLPT/ |
| IrLMP/IrLAP |
— 13 —