Citizen Systems CMP-10BT user manual Communication Port and Switch

Page 19

3.2Communication Port and Switch

(3)IrDA interface unit

Receives data from host and transmits printer status.

For communication with IrDA communication, refer to 4.3.

(4)Serial port

For serial cable (option) connection to host.

For the method of communication with cable and connecting cable, refer to 4.4.

(5)Power switch (ON/OFF)

Press and hold the Power switch for 1 second to turn the printer power ON.

To turn OFF the printer, press and hold the Power switch till the Power LED changes from red to green.

(6)Line feed switch (LF)

Press once for 1 line paper feed.

Press down and hold for continuous paper feed to any required length.

If print data still remains in the printer when printing is suspended due to no paper or the like, recover the printable condition and then press this switch to resume printing.

(7)Open cover switch

Press down to open the paper cover (9) for replacing the paper roll.

(8)Manual cutter

To cut the printed paper, gently pull the paper from the edge of the paper at the angle so that paper firmly contacts the manual cutter.

Improper direction of pull may result in poor cutting or excessive unwinding of paper, or opening the cover. In some case, characters may be destroyed at the first printing after the paper is cut.

(9)Paper cover

Set print paper inside this cover.

— 17 —

Image 19
Contents Mobile Thermal Printer Declaration of Conformity General Precautions Definition of Pictogram About PictogramPrecautions in Handling Printer Precautions on Using Printer Precautions on Using Battery Precautions on Setting Print Paper Precautions on Using Thermal Paper Print Paper Precautions on Using AC Adapter Precautions on Using Special Serial CableTable of Contents List of Commands Maintenance and Service Appendix Introduction FeaturesType Classification Included and Optional AccessoriesFeature Parameters General SpecificationsFeature Parameters Feature Parameters Explanation of Printer Parts LED IndicatorsCommunication Port and Switch Buzzer Inside of Paper CoverBottom Surface and Battery Cover Dimensions and Views Replacing the Paper Roll OperationMethod of Charging Communication by IrDA Communication Via Serial Port Cable Communication by Bluetooth Removing the Battery Pack Installing the Battery Pack DIP Switch Setting Setup menu function Firmware after Ver 2.20EN List of choice in the setup menu Interface Selection Auto Power OFFLow Battery Detection FunctionMonitoring the Print Head Overheating Self Testing and Internal SettingsPrint Area BEL List of CommandsGS H Maintenance and Service Appendix Handling Belt Clip KIT How to Mount Belt ClipMounting Rubber Feet Memo Weee Mark