Citizen Systems CMP-10BT user manual Precautions on Setting Print Paper

Page 8

CAUTION

Do not dip battery in water or sea water. Wet battery may generate heat or may be subject to corrosion.

Do not use or leave battery at high temperature. Using or leaving battery in a place of high temperature may result in liquid leakage, deteriorated performance, or shortened lifetime.

Keep battery beyond the reach of a baby or child. Pay attention

not to let a child take out the battery.

● If the battery is used for the first time, be sure to charge it completely before use.

If any abnormality is found while the battery is in use, stop the operation and carry the battery in local sales agent.

The battery in the printer is shipped partially charged. Please fully charge the battery prior to using the printer.

Carry used battery in recycling agent.

Precautions on Setting Print Paper

CAUTION

Before printing, confirm that print paper is set straight forward at the exit from the print (thermal) head. Skewed setting may result in paper jamming.

To prevent skewed insertion of paper, use the following form for the end of paper.

OK

NGNG

NG

— 6 —

Image 8
Contents Mobile Thermal Printer Declaration of Conformity General Precautions About Pictogram Definition of PictogramPrecautions in Handling Printer Precautions on Using Printer Precautions on Using Battery Precautions on Setting Print Paper Precautions on Using Thermal Paper Print Paper Precautions on Using Special Serial Cable Precautions on Using AC AdapterTable of Contents List of Commands Maintenance and Service Appendix Features IntroductionIncluded and Optional Accessories Type ClassificationGeneral Specifications Feature ParametersFeature Parameters Feature Parameters LED Indicators Explanation of Printer PartsCommunication Port and Switch Inside of Paper Cover BuzzerBottom Surface and Battery Cover Dimensions and Views Operation Replacing the Paper RollMethod of Charging Communication by IrDA Communication Via Serial Port Cable Communication by Bluetooth Removing the Battery Pack Installing the Battery Pack DIP Switch Setting Setup menu function Firmware after Ver 2.20EN List of choice in the setup menu Auto Power OFF Low Battery DetectionFunction Interface SelectionPrint Area Self Testing and Internal SettingsMonitoring the Print Head Overheating List of Commands BELGS H Maintenance and Service Mounting Rubber Feet How to Mount Belt ClipAppendix Handling Belt Clip KIT Memo Weee Mark