Citizen Systems iDP-3210 user manual How to Remove Remaining Roll Paper, Removing Paper Jam

Page 25

iDP-3210 User’s Manual

4.5How to Remove Remaining Roll Paper

(1)Open the printer cover.

(2)Holding the paper guide, pull it in the arrowed direction. The platen roller is detached from the print head and the remaining paper can be pulled out.

Caution : Be sure to use the paper guide for pulling out paper. (Opposite direction)

4.6Removing Paper Jam

(1)Turn Off power switch

(2)Open the printer cover.

(3)Cut off the paper roll near the paper inlet.

(4)Detaching, from the chassis hook, the head springs on both sides by moving them in arrowed direction, lift them up.

(5)Lift up the paper guide knob and the platen roller unit can be detached.

(6)Completely remove the roll paper remains inside of the paper course.

(7)Confirming direction of the platen roller unit, insert it into the inside of bush guide of chassis.

(8)Lightly pushing the platen roller unit, fit the head springs on both sides on the hook part.

CITIZEN

25

 

Image 25
Contents User’s Manual EMC LVDImportant Safety Instructions Citizen Citizen Citizen Precautions for installation Citizen Citizen Ordinary Maintenance Contents Power Supply Connector Specifications Print Control Function Unpacking FeaturesCitizen Model Classification Basic SpecificationsCode 39, Code 128, Codabar Basic SpecificationsRecommended Paper Printing Paper SpecificationsPrinting position Head and Cutter Layout Outer Appearance and Components Operation Connecting AC AdapterConnecting Interface Cable Connecting Drawer Kickout Connector Inserting the Paper Roll Citizen Removing Paper Jam How to Remove Remaining Roll PaperCitizen Canceling Cutter Lock Cleaning Print Head Operation Panel and Display of Error Roller portion of the upper cover works Location of Dip Switch Dip Switch SettingDip Switch Setting Parallel Interface Fault ResetData STBElectrical Characteristics TYP MINSerial Interface DTR Signal Name FunctionDSR 3 I/O Signals Data Configuration Error Detection Electrical Characteristics Connector’s Pin Configurations SpecificationsDrive Circuit Power Supply Connector Specifications ESC SP Command ListESC = Horizontal Tab Command HT Code 09h Command DetailsBIT Function Value Citizen Vertical Direction Horizontal Direction Mode NO. of Dots DOT DensityDPI Citizen Citizen Character SET Paper feed SW valid Paper end With paper Without paper Specifying inverted characters Specifying 90 -right- turned Characters UPC-A UPC-E JAN13 EAN JAN 8 EAN Code ITF Codabar Mode Name DOT Density This action is repeated n1 times Position International IBM Character #2 Character Code TableInternational Character Code Table 1Outler Drawing of Printer Model iDP-3210 Appendix 1 Outline Drawing2Outer Drawing of AC Adapter Model 30AD Appendix 2 Block Diagram