Citizen Systems iDP-3210 user manual Ordinary Maintenance

Page 10

iDP-3210 User’s Manual

Ordinary Maintenance

•Make sure to maintain the equipment after switching OFF the power .

•When cleaning the platen of printer mechanism, wipe out the dirty portion by a cotton pud dipped into ethyl alcohol.

•When cleaning the surface of the main unit case, use soft cloth. In case the dirty portion can not be cleared out by the soft cloth, use wet cloth squeezed tightly.

•Absolutely do not use thinners, trichlene, benzine or ketone group solvents, or chemical-impregnated cleaning cloths.

•In case the print head becomes dirty because of paper dust, clean it by using a soft brush.

Cautions : Do not conduct the maintenance right after printing, since print head and motor are so hot.

•Head Cleaning

(1)Referring to "4. Operation 4.6 Removing of Paper Jam", remove the platen roller unit.

(2)Apply ethyl alcohol on a cotton pud and use this to wipe off dust on the surface of a heating unit.

(3)Mount the platen roller unit.

Cautions : Do not touch the surface of a heating unit of the print head by naked hands or metal objects. Do not carry out these procedures right after printing due to the heat of head motor.

CITIZEN	10

Image 10

Contents User’s Manual LVD EMCImportant Safety Instructions Citizen Citizen Citizen Precautions for installation Citizen Citizen Ordinary Maintenance Contents Power Supply Connector Specifications Print Control Function Features UnpackingCitizen Basic Specifications Model ClassificationBasic Specifications Code 39, Code 128, CodabarPrinting Paper Specifications Recommended PaperPrinting position Head and Cutter Layout Outer Appearance and Components Connecting AC Adapter OperationConnecting Interface Cable Connecting Drawer Kickout Connector Inserting the Paper Roll Citizen How to Remove Remaining Roll Paper Removing Paper JamCitizen Canceling Cutter Lock Cleaning Print Head Operation Panel and Display of Error Roller portion of the upper cover works Dip Switch Setting Location of Dip SwitchDip Switch Setting Parallel Interface Data ResetFault STBElectrical Characteristics MIN TYPSerial Interface DTR Signal Name FunctionDSR 3 I/O Signals Data Configuration Error Detection Electrical Characteristics Connector’s Pin Configurations SpecificationsDrive Circuit Power Supply Connector Specifications ESC SP Command ListESC = Command Details Horizontal Tab Command HT Code 09hBIT Function Value Citizen Vertical Direction Horizontal Direction Mode NO. of Dots DOT DensityDPI Citizen Citizen Character SET Paper feed SW valid Paper end With paper Without paper Specifying inverted characters Specifying 90 -right- turned Characters UPC-A UPC-E JAN13 EAN JAN 8 EAN Code ITF Codabar Mode Name DOT Density This action is repeated n1 times Position Character Code Table International IBM Character #2International Character Code Table Appendix 1 Outline Drawing 1Outler Drawing of Printer Model iDP-32102Outer Drawing of AC Adapter Model 30AD Appendix 2 Block Diagram