Citizen Systems iDP-3210 user manual Printing Paper Specifications, Recommended Paper

Page 17

iDP-3210 User’s Manual

2.3 Printing Paper Specifications

2.3.1 Recommended Paper

Type	: Thermal paper
Paper width	: 80 plus 0/minus 1 mm
Paper thickness	: 65 ± 5 micro m
Roll diameter	: Ø83mm or less
Printed surface	: Outside of the roll (surface)
Recommended paper	: TF50KS-E2C by Nippon paper Mil. or other equivalent
Core	: Ø12mm (inner diameter), Ø18mm (outer diameter)

Caution : 1. Print quality may vary if you use paper other than specified.

2.In such case, change print density by dip switch setting. (See “5 Dip Switch Setting”)

3.Do not paste the paper to the core.

4.Chemicals or oil may change the color of paper, or printed characters may be vanished.

5.Change of paper color starts from approx. 70°C. Pay attention to heat, humidity and sun light.

CITIZEN	17

Image 17

Contents User’s Manual EMC LVDImportant Safety Instructions Citizen Citizen Citizen Precautions for installation Citizen Citizen Ordinary Maintenance Contents Power Supply Connector Specifications Print Control Function Unpacking FeaturesCitizen Model Classification Basic SpecificationsCode 39, Code 128, Codabar Basic SpecificationsRecommended Paper Printing Paper SpecificationsPrinting position Head and Cutter Layout Outer Appearance and Components Operation Connecting AC AdapterConnecting Interface Cable Connecting Drawer Kickout Connector Inserting the Paper Roll Citizen Removing Paper Jam How to Remove Remaining Roll PaperCitizen Canceling Cutter Lock Cleaning Print Head Operation Panel and Display of Error Roller portion of the upper cover works Location of Dip Switch Dip Switch SettingDip Switch Setting Parallel Interface Fault ResetData STBElectrical Characteristics TYP MINSerial Interface DSR Signal Name FunctionDTR 3 I/O Signals Data Configuration Error Detection Electrical Characteristics Drive Circuit SpecificationsConnector’s Pin Configurations Power Supply Connector Specifications ESC = Command ListESC SP Horizontal Tab Command HT Code 09h Command DetailsBIT Function Value Citizen DPI Mode NO. of Dots DOT DensityVertical Direction Horizontal Direction Citizen Citizen Character SET Paper feed SW valid Paper end With paper Without paper Specifying inverted characters Specifying 90 -right- turned Characters UPC-A UPC-E JAN13 EAN JAN 8 EAN Code ITF Codabar Mode Name DOT Density This action is repeated n1 times Position International IBM Character #2 Character Code TableInternational Character Code Table 1Outler Drawing of Printer Model iDP-3210 Appendix 1 Outline Drawing2Outer Drawing of AC Adapter Model 30AD Appendix 2 Block Diagram