Citizen Systems iDP-3210 user manual Citizen

Page 26

iDP-3210 User’s Manual

Caution : Since print head and motor are hot, do not carry out this action right after printing. In case of moving the head springs, do not move it beyond the removable range of the springs.

When removing the remaining paper, do not touch the surface of heating unit of the print head by naked hands or by a metal piece etc.

Except for the necessary case of removing paper jam, do not remove the platen roller unit.

In case of inserting paper roll, make sure to confirm this was inserted correctly.

CITIZEN	26

Image 26

Contents User’s Manual LVD EMCImportant Safety Instructions Citizen Citizen Citizen Precautions for installation Citizen Citizen Ordinary Maintenance Contents Power Supply Connector Specifications Print Control Function Features UnpackingCitizen Basic Specifications Model ClassificationBasic Specifications Code 39, Code 128, CodabarPrinting Paper Specifications Recommended PaperPrinting position Head and Cutter Layout Outer Appearance and Components Connecting AC Adapter OperationConnecting Interface Cable Connecting Drawer Kickout Connector Inserting the Paper Roll Citizen How to Remove Remaining Roll Paper Removing Paper JamCitizen Canceling Cutter Lock Cleaning Print Head Operation Panel and Display of Error Roller portion of the upper cover works Dip Switch Setting Location of Dip SwitchDip Switch Setting Parallel Interface Data ResetFault STBElectrical Characteristics MIN TYPSerial Interface DSR Signal Name FunctionDTR 3 I/O Signals Data Configuration Error Detection Electrical Characteristics Drive Circuit SpecificationsConnector’s Pin Configurations Power Supply Connector Specifications ESC = Command ListESC SP Command Details Horizontal Tab Command HT Code 09hBIT Function Value Citizen DPI Mode NO. of Dots DOT DensityVertical Direction Horizontal Direction Citizen Citizen Character SET Paper feed SW valid Paper end With paper Without paper Specifying inverted characters Specifying 90 -right- turned Characters UPC-A UPC-E JAN13 EAN JAN 8 EAN Code ITF Codabar Mode Name DOT Density This action is repeated n1 times Position Character Code Table International IBM Character #2International Character Code Table Appendix 1 Outline Drawing 1Outler Drawing of Printer Model iDP-32102Outer Drawing of AC Adapter Model 30AD Appendix 2 Block Diagram