Citizen Systems iDP3110 manual Part Descriptions

Page 10

		iDP3110 User's Manual
3.2 Part Descriptions
1.	DC Jack	Insert the output plug of the AC adapter attached.
2.	Power Switch	When switched ON, power is supplied to the printer, starting the initializing operation.
3.	Power Lamp	Lighted when power is turned ON and goes out when turned OFF.
4.	SEL Lamp	Lighted when printer is in the selected condition (ON-LINE).
		Printer becomes operational only when this lamp is on.
5.	LF Switch	Paper is fed when switch is pressed (de-select condition only). Used to supply paper or to
		insert some space in the output.
6.	SEL Switch	Printer is selected (ON-LINE) by pressing this switch.
		Printer is de-selected (OFF-LINE) by pressing the switch again.
7.	Interface Connector	Printer is connected to various hosts via cables.
		Please ensure that both the printer and the host are turned off before connecting.
8.	Printer Cover	Opened to exchange ribbon cassette and paper roll.

CITIZEN

5

Image 10

Contents DOT Matrix Printer Model iDP3110 LVD EMCImportant Safety Instructions For Uses in Canada Pour L’utilisateurs CanadiensContents Accessories FeaturesIntroduction IDP3110 120 Type ClassificationsType AC adapterSpecifications External Appearance and Part Description External AppearancePart Descriptions Operations Connection of the AC AdapterSetting of the Printer Cover Setting of Ribbon Cassettes Setting Paper Self Test Printing General NoticesConnector Pin Assignment Parallel InterfaceDescription of Input / Output Signals GND∙ Output Printer side Serial Interface TTL Signal Signal Direction FunctionDescription of Input / Output Signal NameReset Printer Serial Interface Type DIP Switch SettingDip switch position OFFControl Command Print Control FunctionCitizen Model Citizen Address setting ESCPattern data configuration Citizen Character SET Character codeCitizen Individual Country External Dimensions Citizen Information Systems Division Head Office