Self Test Printing, General Notices | Citizen Systems iDP3110

iDP3110 User's Manual

4.5 Self Test Printing

A self-printing function is incorporated in this product to enable the printer to check itself. This function is triggered by the following procedure.

(1)Set paper to the printer.

(2)Ensure that the ribbon cassette is attached correctly and turn the power OFF.

(3)Turn ON the power switch while holding the LF switch down. Release the LF switch after the self-printing operation has started.

Printing is initiated by this operation. To end self-printing, turn OFF the printer.

4.6 General Notices

(1)Never operate your printer without loading paper and ribbon cassette. Any printing without paper and ribbon cassette may cause damage to printer head.

(2)Replace ribbon cassette before it is worn with rents.

(3)Be careful not to drop any foreign matters, such as paper clips and pin and the like into your printer. Those can cause mechanical trouble.

(4)Nothing shall be placed on the radiation vents to the printer.

(5)Place your printer always on a stable desk which is set horizontal.

(6)No organic solvent (thinner, benzin or the lie) shall be used in sweeping clean the surface of the main body case.

(7)Make sure that the power of the printer is turned off whenever you do the following.

1)Taking out any foreign matter which was dropped into the printer.

2)Replacing the ribbon cassette.

CITIZEN