Citizen Systems iDP3110 manual Setting Paper

Page 14

iDP3110 User's Manual

4.4 Setting Paper

(1)Remove the printer cover.

(2)Ensure that the end of the paper is straight or incline as indicated in the diagram.

(3)Insert the end of the paper into the slot of the printer mechanism.

(4)After turning ON the printer, press the LF switch until 5 to 6 cm of paper is fed out of the printer mechanism.

(5)Insert paper after moving aside the paper holder in the direction of the arrow. Then, secure the center of the roll with the holder.

(6)Then, attach the printer cover so the end of the paper comes out of the opening in the cover.

CITIZEN

9

Image 14

Contents DOT Matrix Printer Model iDP3110 LVD EMCImportant Safety Instructions For Uses in Canada Pour L’utilisateurs CanadiensContents Introduction FeaturesAccessories IDP3110 120 Type ClassificationsType AC adapterSpecifications External Appearance and Part Description External AppearancePart Descriptions Operations Connection of the AC AdapterSetting of the Printer Cover Setting of Ribbon Cassettes Setting Paper Self Test Printing General NoticesConnector Pin Assignment Parallel InterfaceDescription of Input / Output Signals GND∙ Output Printer side Serial Interface TTL Signal Signal Direction FunctionDescription of Input / Output Signal NameReset Printer Serial Interface Type DIP Switch SettingDip switch position OFFControl Command Print Control FunctionCitizen Model Citizen Address setting ESCPattern data configuration Citizen Character SET Character codeCitizen Individual Country External Dimensions Citizen Information Systems Division Head Office