Citizen CLP-2001 user manual LCD/LED Indications and Adjustment Controls, Normal Operating Mode

2.2LCD/LED Indications and Adjustment Controls

1)LCD

The eight-character LCD screen displays the current printer status, configuration settings, or an error message.

2)LEDs

Power: Lights when the power is tuned ON.

Error: Lights or blinks when an error occurs.

3)Adjustment controls

The three adjustment controls are used to adjust the paper gap (transparent type) sensor sensitivity, black line (reflective type) sensor sensitivity, and LCD contrast.

2.3Normal Operating Mode

When the power is turned on, the printer enters the normal operating mode. The control keys function as follows:

Pause key

Temporarily pauses printing. "Pause" is displayed on the LCD screen. If pressed during printing, printing will stop after the current label is printed. Press the Pause key again to resume printing.

Feed key

Advance to the top of the next label. When using continuous paper, make sure the Sensor selection is set to ContinuP or a Paper error will result.

Stop key

With this key, the operator can stop and cancel the current print job. Pressing the Stop key during printing stops the printing immediately. Pressing the Stop key again cancels the print job. If pressed when the Error LED is illuminated, the error will be cleared and the printer will pause. But if the error is not cleared, the Error LED will remain illuminated.

2-3