Citizen CLP-2001 user manual System Maintenance Mode

2.6System Maintenance Mode

The printer enters the system maintenance mode when the Pause, Feed and Stop keys are pressed and held down simultaneously while turning the printer on.

If those keys are pressed further for five seconds after the printer has entered the system maintenance mode, the system will be reset and the settings in the backup memory will be reset to the following default values:

•RS-232C communication setting

Baud rate: 9600 bps

Data length: 8 bits

•Print mode setting

Print mode: Thermal-transfer printing

•Optional function setting

Peeler: OFF

Cutter: OFF

Ejector: OFF

•Paper sensor type setting

Sensor: Transparent type (paper gap detection)

•Compatible model setting Native: ON

[Functions]

Set the RS-232C communication parameter and enter the paper sensor sensitivity adjustment mode.

•Selects the mode when the Pause key is pressed.

•Selects the mode item when the Feed key is pressed.

•Stores the selected settings in the backup memory when the Stop key is pressed and the printer comes on-line.

2-5