BIOS Setup
3.1.6 PnP/PCI Configurations
This section describes configuring the PCI bus system. It covers some very technical items and it is strongly recommended that only experienced users should make any changes to the default settings.
3
The settings on the screen are for reference only. Your version may not be identical to this one.
3.1.6.1 Init Display First
This field is used to select whether to initialize the onboard VGA, PCI Express or PCI first when the system boots.
Onboard | When the system boots, it will first initialize the |
| onboard VGA. |
PCIEx | When the system boots, it will first initialize the PCI |
| Express x16 graphics card. |
PCI Slot | When the system boots, it will first initialize PCI. |
3.1.6.2Reset Configuration Data
Enabled The BIOS will reset the Extended System Configuration Data (ESCD) once automatically. It will then recreate a new set of configuration data.
Disabled The BIOS will not reset the configuration data.
8 7