Klark Teknik DN9652, DN 9650 specifications Front Panel, Klark Teknik roundel Has a blue backlight

Page 26

Chapter 3: Front Panel

Item Description

Illustration

5NETWORK section This section shows the status of the network module connection, as follows:

Constantly illuminated green with red extinguished = cable/fibre is synchronised, but there is no audio activity.

Pulsating green with red extinguished = cable/fibre is on with audio activity.

Green extinguished with red illuminated = cable/fibre are off.

6ASYNCHRONOUS SAMPLE RATE CONVERTER section (DN9652 only) This section shows the status of the configured clock source, which can be ASRC or network output. Each source has a yellow ENABLED LED, which illuminates to show that the source is enabled. The DN9652 also has the facility to stop the output clock if the input clock fails. This condition is indicated by the illumination of the red STOPPED LED.

For the LED status, see Table 2 “DN9652 ASRC LED status” on page 13.

7LCD display This backlit, alphanumeric display has two rows of 16 digits. During boot up the display shows the unit’s current

IP address and subnet mask for about five seconds and then the user-configured text thereafter.

8

Klark Teknik roundel Has a blue backlight,

 

which illuminates to show that power is on.

9

Cut-outThere are four cut-outs for rack

N/A

 

mount fixings.

 

 

 

 

 

DN9650/DN9652 Network Bridge

12

Operator Manual

Image 26
Contents DN9650/DN9652 Page Important Safety Instructions Instructions DE Sécurité Importantes Klark Teknik Hereby declares that the following productPage SVP, Midas Klark Teknik AVP, Product Development Page Licences Page GNU General Public License GPL Page Contents Contents Unpacking InstallationGetting Started Connecting up the DN965X Getting StartedTo switch the unit on/off Powering the unitPowering the unit Configuring the unit for the first time Connecting a DN965X to a computerConfiguring the unit for the first time Getting Started Overview About the DN965X unitsKey features OverviewChanging the network module Host software version and updatesHost software version and updates Trademarks Service and supportAbout this manual Front Panel Front Panel Klark Teknik roundel Has a blue backlightDN9650 Asrc LED status DN9652 Asrc LED statusFront Panel Rear Panel Item DescriptionClock section Control connectorMains input AES50 section DN9650 onlyAbout the web browser interface Configuring the DN965XAbout DN965X configuration Configuring the DN965X Item Screen elementChanging the displayed text Setting up a network moduleTo configure a network module card Changing the displayed textClocking Options Clocking optionsTo change the clocking options of a network module To change the IP address of the DN965X Ethernet IP AddressingEthernet IP Addressing Software Updating the unit’s host softwareTAR files and recommended file upload order Updating the unit’s host software Default IP address Default display Operation Using a Madi module as a Madi splitTo configure the Madi module as a Madi split Operation Appendix a Technical Specification Appendix a Technical Specification Appendix B Functional Block Diagrams Appendix B Functional Block Diagrams DN9650DN9652 DN9652Appendix B Functional Block Diagrams Routine maintenance Appendix C Service InformationRestoring the factory defaults CleaningOptional equipment Special accessoriesChecking/replacing the mains fuse Equipment disposal