MSC CX-MB-EVA2 user manual Jili Interface, Standard Jili Connector, JILI40 Connector

Page 27

CX-MB-EVA2 User's Manual	Hardware

4.7JILI Interface

4.7.1Standard JILI Connector

A standard JILI connector can be used alternatively for connection of LCDs.

Both, single and dual channel LCDs, can be connected to the base board via small adaptor boards.

Specification:
	References:	X16
	Connector:	Hirose FH12-40S-0.5SV

Pinout: "standard JILI" according to JILI specification [4]

4.7.2JILI40 Connector

Any LCD display can be connected via an adaptor board to the JILI40 connector. Two 24 bit LVDS channels are available on this 40-pin header

Specification:
	References:	X46
	Connector:	Samtec TMM-120-01-LM-D-SM-P

Pinout: "JILI40" according to JILI specification [4]

27

Image 27

Contents User’s Manual EMC Rules Trademarks Copyright NoticeImportant Information DisclaimerHardware Preface General InformationIntroduction MechanicsLCD Eeprom SW0611 Illustrations Tables Revisions and Modifications Reference DocumentsRevision Date Comment January 14 First release Definitions and Abbreviations Product Description FeaturesIntroduction Illustration 1 Block Diagram Base Board Block DiagramIllustration 2 Positioning of the Connectors Positioning of the ConnectorsAssembly notes DimensionsPlug-in Position of the COM Express module SpecificationACRST# COMExpress Connector Rows a and B PCIRESET# IDECBLID# PCI Slots Assignment PCI slot to connector reference SpecificationFRAME# PCI Express x1 Slots Assignment PCIe Lane to connector reference SpecificationPCI Express x16 Graphics Slot A36 PERn4 B36 VGA Interface Lvds Eeprom LVDS-InterfaceBacklight Inverter Interface Standard Jili Connector JILI40 ConnectorJili Interface TV Out Audio 1 AC97 codecMono-Microphone Stereo LineIn Specification Pinout LineIn Stereo LineOut SpecificationPinout LineOut Stereo Headphone Specification 10.1.1.1 40-pin IDE interface IDE InterfaceHDA codec Primary IDE ChannelSpecification Power Supply SATA-InterfaceCompact Flash Interface USB Topology USB Power SupplyLPC Slot Ethernet15 I/O Connector Gpio ATX ConnectorSpecification ATX connector Specification ATX12V connectorInterfaces used by the SuperIO Characteristics of the COM portsSuperIO COM Ports18.3 PS/2 IrDAMonitored voltages Fan interfaceIntel Fan interface SuperIO Hardware MonitorSMB Hardware Monitor Serial Eeprom on SMBusSerial Eeprom on I2C-Bus OnBoard BIOS-Flash POST-Code DisplayLattice Programming Interface Beeper BatteryPower Button Reset ButtonSleep State LED Display Ground PinsMiscellaneous Resistors for current measuringJumper settings ATX Funktion Jumper J1301 Battery Jumper J1101Super I/O disable Jumper J6 SMBus Hardware monitor address Jumper J1303DIP-switch settings