MSC CX-MB-EVA2 Copyright Notice, Important Information, Disclaimer, EMC Rules Trademarks

Page 2

Preface

Copyright Notice

Copyright © 2008 MSC Vertriebs GmbH. All rights reserved.

Copying of this document, and giving it to others and the use or communication of the contents thereof, are forbidden without express authority. Offenders are liable to the payment of damages.

All rights are reserved in the event of the grant of a patent or the registration of a utility model or design.

Important Information

This documentation is intended for qualified audience only. The product described herein is not an end user product. It was developed and manufactured for further processing by trained personnel.

Disclaimer

Although this document has been generated with the utmost care no warranty or liability for correctness or suitability for any particular purpose is implied. The information in this document is provided “as is” and is subject to change without notice.

EMC Rules

This unit has to be installed in a shielded housing. If not installed in a properly shielded enclosure, and used in accordance with the instruction manual, this product may cause radio interference in which case the user may be required to take adequate measures at his or her own expense.

Trademarks

All used product names, logos or trademarks are property of their respective owners.

Certification

MSC Vertriebs GmbH is certified according to DIN EN ISO 9001:2000 standards.

Life-Cycle-Management

MSC products are developed and manufactured according to high quality standards. Our life- cycle-management assures long term availability through permanent product maintenance. Technically necessary changes and improvements are introduced if applicable. A product- change-notification and end-of-life management process assures early information of our customers.

Product Support

MSC engineers and technicians are committed to provide support to our customers whenever needed.

Before contacting Technical Support of MSC Vertriebs GmbH, please consult the respective pages on our web site at www.msc-ge.com/support-boards for the latest documentation, drivers and software downloads.

If the information provided there does not solve your problem, please contact our Technical Support:

Email: support.boards@msc-ge.com

Phone: +49 8165 906-200

Image 2
Contents User’s Manual Disclaimer Copyright NoticeImportant Information EMC Rules TrademarksMechanics Preface General InformationIntroduction HardwareLCD Eeprom SW0611 Illustrations Tables Revision Date Comment January 14 First release Revisions and ModificationsReference Documents Definitions and Abbreviations Features Product DescriptionIntroduction Block Diagram Illustration 1 Block Diagram Base BoardPositioning of the Connectors Illustration 2 Positioning of the ConnectorsDimensions Assembly notesSpecification Plug-in Position of the COM Express moduleACRST# COMExpress Connector Rows a and B PCIRESET# IDECBLID# Assignment PCI slot to connector reference Specification PCI SlotsFRAME# Assignment PCIe Lane to connector reference Specification PCI Express x1 SlotsPCI Express x16 Graphics Slot A36 PERn4 B36 VGA Interface LVDS-Interface Lvds EepromBacklight Inverter Interface Jili Interface Standard Jili ConnectorJILI40 Connector TV Out Mono-Microphone Audio1 AC97 codec Pinout LineOut Stereo Headphone Specification Stereo LineIn SpecificationPinout LineIn Stereo LineOut Specification Primary IDE Channel IDE InterfaceHDA codec 10.1.1.1 40-pin IDE interfaceCompact Flash Interface Specification Power SupplySATA-Interface USB Power Supply USB TopologyEthernet LPC Slot15 I/O Connector Specification ATX12V connector ATX ConnectorSpecification ATX connector GpioCOM Ports Characteristics of the COM portsSuperIO Interfaces used by the SuperIOIrDA 18.3 PS/2SuperIO Hardware Monitor Fan interfaceIntel Fan interface Monitored voltagesSerial Eeprom on I2C-Bus SMB Hardware MonitorSerial Eeprom on SMBus Lattice Programming Interface OnBoard BIOS-FlashPOST-Code Display Reset Button BatteryPower Button BeeperResistors for current measuring Ground PinsMiscellaneous Sleep State LED DisplayJumper settings SMBus Hardware monitor address Jumper J1303 Battery Jumper J1101Super I/O disable Jumper J6 ATX Funktion Jumper J1301DIP-switch settings