MSC CX-MB-EVA2 user manual SMB Hardware Monitor, Serial Eeprom on SMBus, Serial Eeprom on I2C-Bus

Page 40

CX-MB-EVA2 User's Manual	Hardware

5V

Measured temperatures

Ambient temperature

The temperature is measured with a thermistor.

4.19SMB Hardware Monitor

In addition to the SuperIO hardware monitor you can also connect a SMBus hardware monitor. This chip enables you to control different voltages, temperatures and rotation speeds in legacy-free-designs where the SuperIO is not supported.

Hardware monitor:

Winbond W83L786R

Controlled voltages

VBAT

3.3V

12V

5V

Measured temperatures

Ambient temperature

The temperature is measured with a thermistor.

Fan interface

For evaluation and control of the revolution speeds please refer to chapter 4.18.4.

4.20Serial EEPROM on SMBus

For testing purposes a serial EEPROM (4kBit) is connected to the SMBus. To avoid address conflicts, the address can be selected with dip switch SW1101.

4.21Serial EEPROM on I2C-Bus

For testing purposes a serial EEPROM (4kBit) is connected to the I2C bus. To avoid address conflicts, the address can be selected with dip switch SW1102.

40

Image 40

Contents User’s Manual Copyright Notice Important InformationDisclaimer EMC Rules TrademarksPreface General Information IntroductionMechanics HardwareLCD Eeprom SW0611 Illustrations Tables Reference Documents Revisions and ModificationsRevision Date Comment January 14 First release Definitions and Abbreviations Features Product DescriptionIntroduction Block Diagram Illustration 1 Block Diagram Base BoardPositioning of the Connectors Illustration 2 Positioning of the ConnectorsDimensions Assembly notesSpecification Plug-in Position of the COM Express moduleACRST# COMExpress Connector Rows a and B PCIRESET# IDECBLID# Assignment PCI slot to connector reference Specification PCI SlotsFRAME# Assignment PCIe Lane to connector reference Specification PCI Express x1 SlotsPCI Express x16 Graphics Slot A36 PERn4 B36 VGA Interface LVDS-Interface Lvds EepromBacklight Inverter Interface JILI40 Connector Standard Jili ConnectorJili Interface TV Out 1 AC97 codec AudioMono-Microphone Pinout LineIn Stereo LineOut Specification Stereo LineIn SpecificationPinout LineOut Stereo Headphone Specification IDE Interface HDA codecPrimary IDE Channel 10.1.1.1 40-pin IDE interfaceSATA-Interface Specification Power SupplyCompact Flash Interface USB Power Supply USB TopologyEthernet LPC Slot15 I/O Connector ATX Connector Specification ATX connectorSpecification ATX12V connector GpioCharacteristics of the COM ports SuperIOCOM Ports Interfaces used by the SuperIOIrDA 18.3 PS/2Fan interface Intel Fan interfaceSuperIO Hardware Monitor Monitored voltagesSerial Eeprom on SMBus SMB Hardware MonitorSerial Eeprom on I2C-Bus POST-Code Display OnBoard BIOS-FlashLattice Programming Interface Battery Power ButtonReset Button BeeperGround Pins MiscellaneousResistors for current measuring Sleep State LED DisplayJumper settings Battery Jumper J1101 Super I/O disable Jumper J6SMBus Hardware monitor address Jumper J1303 ATX Funktion Jumper J1301DIP-switch settings