MSC CX-MB-EVA2 user manual TV Out, Pinout TV-Out

CX-MB-EVA2 User's Manual Hardware

4.8TV Out

A TV-OUT connector is implemented for displaying the video signal on a TV set (or the like). The base board supports the following video signals

￿Composite Video

￿Component Video (YPbPr)

￿S-Video

The type of the video signal is defined by the graphics controller on the COM Express module.

Specification:

￿ References: X17

￿ Connector: AMP 5786766-1

￿Pinout: Refer to Table 6

Pin	Signal name	Composite	Component	S-Video
1	TV_IRTN_B	Ground	Ground	Ground
2	TV_IRTN_C	Ground	Ground	Ground
3	TV_DACB	not used	Luminance (Y)	Luminance
4	TV_DACC	not used	Chrominance (Pr)	Chrominance
5	TV_DACA	CVBS	Chrominance (Pb)	not used
6	TV_IRTNA	Ground	Ground	Ground
7	RSVD	reserved	reserved	reserved

Table 11 Pinout TV-Out

The signals can be adapted to a different interface with a 10-pin header.

Specification:
￿	References:	X53
￿	Connector:	IDC-M 10pol. THT RM2.54

￿Pinout: Refer to Table 7

Pin	Signal	Pin	Signal
1	GND	2	TV_DACA
3	GND	4	TV_DACB
5	GND	6	TV_DACC
7	GND	8	GND
9	GND	10	GND

Table 12 Pinout TV-Out Pin header

28