Metrologic Instruments MLPN 2178 manual

Page 14

To maintain compliance with applicable standards, all circuits connected to the scanner must meet the requirements for SELV (Safety Extra Low Voltage) according to EN 60950.

1.When connecting to a PS/2 computer,

attach to the com- munication cable (#51573) the 5M 6F adaptor to the female connector and the 5F 6M adaptor to the male connector.

2. If the PC is on, exit the application and turn the PC off.

Figure 1

3. Disconnect the keyboard from the PC.

4. Plug the communication cable to the PC and the keyboard. (Refer to Figure 1).

5. Connect the 25-pin D-type connector on the scanner’s head cable to the communication cable.

6. Check the AC input requirements of the transformer to make sure the voltage matches the AC outlet.

(A socket-outlet shall be installed near the equipment and shall be easily accessible.)

7. Plug the transformer into the side of the female D-type connector located on the communication cable. Plug the transformer into the AC outlet to supply power to the scanner.

8. Turn the PC on.

10

Image 14

Contents Installation and User’s Guide Metrologic INSTRUMENTS, INCLocations USA Corporate Headquarters EuropeTable of Contents Appendix C Appendix aAppendix B Appendix DIntroduction Unpacking List Scanner Connections to the Host Configuration of the Scanner to the Host System Cloning Feature CloningVersion 11 IBM 46XX Scanner Configuring the Scanner Configuring the IBM IBM 4684 and 4694 SystemsScanner Installation to a PC Keyboard Port PC TypePage PC Application Note Installation of the MS700 Series Stand Attaching the Scanner to the Stand MS700i and MS720i Series Features Scanner performs a good read of a bar codeVisual Indicators No Red or Green LEDSignaux optiques Ni la diode rouge, ni la diode verte nest alluméeOptische Anzeigen Weder rote noch grüne LeuchtdiodenanzeigeSegnali ottici Né il diodo luminoso rosso né quello verde sono accesiVolume Settings Labels InfraRed IR Object Sensor Symbol Orientation Active Scan Region for the MS700i and MS715i Scanner Active Scan Region for the MS720i Scanner Page Horizontal Scan Width vs. Distance for the MS720i Scanner Depth of Field for the MS700i and MS715i Scanner Mil /1000 Code TypeCode Density Page Depth of Field for the MS720i Scanner Code Type Minimum Small Code Density Element Mil /1000Page Scanner Version Identifier Communication Protocols MaintenanceApplications and Protocols Mechanical SpecificationsAppendix a ElectricalOperational EnvironmentalDefault Settings Appendix BSweda Three Beeps on Timeout No Beeps on IR Timeout Baud Rate Parallel Light 46XX Parallel Light Pen 46XX 232 Appendix C Pin FunctionVersion 2 Pin Assignments for Parallel Communication EOTVersion 26 Pin Assignments for Multi-drop RS-422 Versions 11 and 24 Pin Assignments for RS-485 Pin Function Warranty and Disclaimer Limited Warranty Appendix DDisclaimer Appendix E RemarqueAnmerkung Appendix F PatentsVolume Control Card Page Index LEDLaserklasse UL/CSA/TUV