Micro Star Computer MS- 9130 v1.x USB Controller, Usb, USBKeyboard/MouseSupport, SuperIO Device

MS-9130 Workstation Mainboard

controller cards to connect audio connectors, set the field to Disabled. Setting options: Disabled, Auto.

USB Controller

Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have USB peripherals. Settings: All Enabled, All Disabled, 1&2 USB Port, 2&3 USB Port, 1&3 USB Port, 1 USB Port, 2 USB Port, 3 USB Port.

USB 2.0

Set to Enabled if you need to use any USB 2.0 device in the operating system that does not support or have any USB 2.0 driver installed, such as DOS and SCO Unix. Setting options: Disabled, Enabled.

USBKeyboard/MouseSupport

Set to Enabled if you need to use a USB keyboard/mouse in the operating system that does not support or does not have any USB driver installed, such as DOS and SCO Unix.

OnboardBroadcomNIC

This item enables or disables the initialization of the onboard Broadcome NIC (network interface card). Setting options: Enabled, Disabled.

OnboardLanBootROM

This item enables or disables the initialization of the onboard LAN Boot ROMs during bootup. Selecting Disabled will speed up the boot process.

SuperIO Device

Press <Enter> and the following sub-menu appears:

OnboardFDCController

Select Enabled if your system has a floppy disk controller (FDD) installed on the system board and you wish to use it. If you install add-on FDC or the system has no floppy drive, select Disabled in this field. Setting options: Enabled, Disabled.

3-16