BIOS Setup
VGA, LPT & COM, HDD & FDD, PCI Master
These fields specify whether the system will be awakened from power saving modes when activity or input signal of the specified hardware peripheral or component is detected.
PowerOnbyPCICard
When it is set to Enabled, the feature allows your system to be powered on by the PCI card. Setting options: Enabled, Disabled.
Modem Ring Resume
When it is set to Enabled, the feature allows your system to support COM port Modem to resume. Setting options: Enabled, Disabled.
RTC Alarm Resume
When it is set to Enabled, your can set the date and time at which the RTC
Date(ofMonth)
The field specifies the date for Resume By RTC Alarm. Settings: 0~31.
Resume Time (hh:mm:ss)
The field specifies the time for Resume By RTC Alarm. Format is <hour> <minute><second>.
MSIRemindsYou...
If you have changed this setting, you must let the system boot up until it enters the operating system, before this function will work.
IRQs Activity Monitoring
Press <Enter> and the following