Micro Star Computer MS- 9130 v1.x manual CPU Installation Procedures for Socket

MS-9130 Workstation Mainboard

CPU Installation Procedures for Socket 940

1.Make sure that the computer is turned off, and the power cord disconnected before in- stalling the CPU.

2.Pull the lever sideways away from the socket, and raise it up to a 90-degree angle.

Open Lever

					te
				la
			P
		g
	in
lid
S

3.Locate the cut edge of the CPU. When the CPU is in- stalled into the socket, this cut edge should be aligned with the corner marking an arrow on the Socket 940.

Please note that the CPU can only fit in a correct orientation, DO NOT use force to install the CPU into the socket.

4.Place the CPU onto the socket and press it down firmly into the socket. The pins of the CPU should be embedded into the socket completely.

5.Close the lever to secure the CPU. Do not close the level until the CPU’s pins are fully inserted; otherwise, the pins may be damaged.

Cut edge

Corner marking an arrow

Press down
the CPU	Close
	Lever

O X

2-4