MegaVision Network Management System manual Rmon Support, Rmon Group 1 Statistics Window

RMON Support

MegaVision supports RMON Groups 1,2,3,9 for any RMON-capable device, which supports the same groups via SNMP.

RMON Group 1 Statistics Window

You can enter this window from:

1.The Main Window Menu Bar (under Monitor: RMON Group 1 Statistics)

2.From the device window menu bar of certain devices.

Figure 29. RMON Group 1 Window.

•The selected device is displayed in the Device Name field, but you can select any device on the map via the pull-down menu.

•Click the Intfs and Cnts buttons to open the RMON Group 1 Statistics per Interface and Counters Graphs per Counter windows.

•The Segments Errors/Sec and Utilization % windows are updated every polling interval.

•You can delete unwanted interfaces with the Delete button in the Control Table Entries section.

•The buttons at the bottom of the graphs have the same function as those in the line graphs window.