MegaVision Network Management System Rmon Groups 3 & 9 Alarms and Events, Alarms control Table

When you open RMON Group 2 Window or select any History Control Table Entry, two Trend Graph Windows open (in addition to the main window) to reflect the History Table Information graphically:

•Interface Errors per interval (right window).

•Interface Utilization per interval in % (left window).

While in the RMON Group 2 Window, you may jump to any other device without selecting it in the main map via the Device Name box (in the bottom right corner of Figure 30).

RMON Groups 3 & 9 (Alarms and Events)

You can enter this window from:

1.The Main Menu Bar (Monitor: RMON Groups 3:9...)

2.The Device Window Menu bar for certain devices.

Figure 32. RMON Groups 3,9 Window

Alarms control Table

Alarms Control Table lists the control entries for RMON Group 3 (Alarms). Every entry contains threshold information, which describes an alarm that should be generated when a pre-set threshold is exceeded. This table may contain entries for several of the device’s