Sennheiser EK 3041-U manual Screw the mounting frame to the Sony camcorder housing

Page 10

10Mounting the EK 3041-U into the Sony SX camcorder

Preparation:

Mount the base plate

suitable for the Sony camcorder and fix it to the left and right of the receiver by means

of two screws.

The Sony adaptor features

a 15-pin connector (accessories).

SONY

Mounting the receiver into the camcorder:

•Screw the mounting frame to the Sony camcorder housing.

•Insert the receiver in the slot-in facility until the 15-pin connector securely connects.

•Fix the receiver (from above) to the mounting frame by means of four small

screws.

36

Image 10

Contents EK 3041-U Instructions for useThank you for choosing Sennheiser ChapterBrief description Special featuresModes of application Noise reduction with HiDyn plus Diversity reception Connections and operating elements Mounting the antennæ Preparation Screw the mounting frame to the Ikegami camcorder housing Screw the mounting frame to the Sony camcorder housing Power supply Switching the receiver offPress the SET button once Display of receiving frequency or channel numberOverview of menus Press the SET button twicePress the SET button four times CancellationPress the SET button three times Press the SET button five timesAdjusting the headphone volume Adjusting the squelch Changing the receiving frequency Assigning a channel number Limiter Locking the buttons Locking the operating buttons / „Lock mode functionUnlocking the buttons Sennheiser transmitters report their battery/accupack status Pocket transmitters Suitable Sennheiser transmittersHand-held transmitters Error messages Safety instructionsError checklist Recommended accessories Technical data Via GA 3041-B Power supply148