Sennheiser EK 3041-U manual Preparation

Page 8

8Mounting the EK 3041-U into the Philips LDK 120 camcorder

Preparation:

Mount the base plate suitable for the Philips camcorder and fix it

to the left and right of the receiver by means of two screws. The Philips adaptor features

a 44-pin connector (accessories).	PHILIPS

Mounting the receiver into the camcorder:

•Fix the receiver (from above) to the mounting frame by means of four small screws.

•Insert the receiver in the slot-in facility until the 44-pin connector securely connects.

•Fix the receiver to the slot-in facility by means of the two knurled screws.

34

Image 8

Contents EK 3041-U Instructions for useThank you for choosing Sennheiser ChapterModes of application Special featuresBrief description Noise reduction with HiDyn plus Diversity reception Connections and operating elements Mounting the antennæ Preparation Screw the mounting frame to the Ikegami camcorder housing Screw the mounting frame to the Sony camcorder housing Power supply Switching the receiver offDisplay of receiving frequency or channel number Overview of menusPress the SET button once Press the SET button twiceCancellation Press the SET button three timesPress the SET button four times Press the SET button five timesAdjusting the headphone volume Adjusting the squelch Changing the receiving frequency Assigning a channel number Limiter Unlocking the buttons Locking the operating buttons / „Lock mode functionLocking the buttons Sennheiser transmitters report their battery/accupack status Hand-held transmitters Suitable Sennheiser transmittersPocket transmitters Error checklist Safety instructionsError messages Recommended accessories Technical data Via GA 3041-B Power supply148