Sennheiser EK 3041-U manual Screw the mounting frame to the Ikegami camcorder housing

Page 9

9Mounting the EK 3041-U into the Ikegami HL-V77 camcorder

Preparation:

Mount the base plate suitable for the Ikegami camcorder and fix it

to the left and right of the receiver by means of two screws. The Ikegami adaptor features a 25-pin connector (accessories).

IKEGAMI

Mounting the receiver into the camcorder:

•Screw the mounting frame to the Ikegami camcorder housing.

•Insert the receiver in the slot-in facility until the 25-pin connector securely connects.

•Fix the receiver (from above) to the mounting frame by means of four small screws.

35

Image 9

Contents Instructions for use EK 3041-UChapter Thank you for choosing SennheiserSpecial features Brief descriptionModes of application Noise reduction with HiDyn plus Diversity reception Connections and operating elements Mounting the antennæ Preparation Screw the mounting frame to the Ikegami camcorder housing Screw the mounting frame to the Sony camcorder housing Switching the receiver off Power supplyOverview of menus Display of receiving frequency or channel numberPress the SET button once Press the SET button twicePress the SET button three times CancellationPress the SET button four times Press the SET button five timesAdjusting the headphone volume Adjusting the squelch Changing the receiving frequency Assigning a channel number Limiter Locking the operating buttons / „Lock mode function Locking the buttonsUnlocking the buttons Sennheiser transmitters report their battery/accupack status Suitable Sennheiser transmitters Pocket transmittersHand-held transmitters Safety instructions Error messagesError checklist Recommended accessories Via GA 3041-B Power supply Technical data148