Limiter | Sennheiser EK 3041-U specs

21 Limiter

Your EK 3041-U receiver is equipped with a switchable limiter which limits the output voltage of the built-in headphone amplifier. The limiter protects your hearing and should therefore always be switched on.

Note

The limiter can only be used if the receiver is not inserted in the slot-in facility of a camcorder but is operated as a stand-alone receiver, e.g. inserted into a special housing (accessory). If the receiver is inserted in the slot-in facility of a camcorder, this menu is skipped.

Briefly press the SET button five times.

The display now indicates „—Ltd.—“ in alternation with the current limiter setting, for example:

•„Ltd.OFF“, if the limiter is switched off,

• „Ltd.-10“, if the limiter is set to - 10 dB,

•„Ltd.-20“, if the limiter is set to - 20 dB.

With the / buttons you can now select the desired limiter setting.

The new setting becomes effective immediately without having to be stored.

Notes

You can discontinue the programming of this menu at any time. Press the

SET button to change to the next menu or briefly press the ON/OFF switch to discontinue your entry. The cancellation is briefly confirmed on the display with „ESC“. The display then switches back to the standard display (display of receiving frequency or channel number)( see chapter 16).

After about 15 seconds, the receiver automatically returns to normal operation if no entry has been made during this period. Here, too, „ESC“ flashes briefly.