Sennheiser EK 3041-U manual Mounting the antennæ

Page 7

7 Mounting the antennæ

Your EK 3041-U receiver is supplied with two antenna which are necessary for true diversity operation (see chapter 5). The length of the antenna has been matched to the frequency range of your EK 3041-U receiver.

Insert the antenna into sockets and and screw them tight.

Image 7

Contents Instructions for use EK 3041-UChapter Thank you for choosing SennheiserBrief description Special featuresModes of application Noise reduction with HiDyn plus Diversity reception Connections and operating elements Mounting the antennæ Preparation Screw the mounting frame to the Ikegami camcorder housing Screw the mounting frame to the Sony camcorder housing Switching the receiver off Power supplyPress the SET button twice Display of receiving frequency or channel numberOverview of menus Press the SET button oncePress the SET button five times CancellationPress the SET button three times Press the SET button four timesAdjusting the headphone volume Adjusting the squelch Changing the receiving frequency Assigning a channel number Limiter Locking the buttons Locking the operating buttons / „Lock mode functionUnlocking the buttons Sennheiser transmitters report their battery/accupack status Pocket transmitters Suitable Sennheiser transmittersHand-held transmitters Error messages Safety instructionsError checklist Recommended accessories Via GA 3041-B Power supply Technical data148