Step 4. Specify the desired setting for the SentryII Remote client.
NOTE: This splash screen is only available during the install process. To change these settings after installation, you may edit the usr/local/sbin/SIIRemote.ini file.
The following is a description of the fields contained on this page:
• | Server Address | The SentryII Server’s IP address. |
• | Server Port | The API port number of the SentryII Server. (See Server Settings on page 13) |
• | Username | The default is admin. This setting must coincide with the defined SentryII users list. (See |
|
| User Management on page 13) |
• | Password | The default is admin. This setting must coincide with the defined SentryII passwords list. |
|
| (See User Management on page 13) |
• | On Battery Shutdown | The amount of time in seconds, after the event occurs, before the Remote Client will be |
|
| shutdown. If the event is removed before the delay time is reached, the action will be |
|
| cancelled. (See UPS and/or Operating System Shutdown on page 20) |
• | Low Battery Shutdown | The amount of time in seconds, after the event occurs, before the Remote Client will be |
|
| shutdown. (See UPS and/or Operating System Shutdown on page 20) |
NOTE: All Remote clients need to be configured to shutdown before the SentryII Server.
- 36 -