Minuteman UPS SentryII UPS user manual Hp-Ux

Page 37

Starting SentryII Services

If, at the end of the installation, you selected to start SentryII, then SentryII should be running.

If not, please perform the following steps:

To start SentryII, execute the following commands for your platform:

HP-UX

1.cd /opt/SentryII

2. ./SIIRemote daemon

SCO UnixWare / Open Desktop

1.cd /etc/init.d

2. ./SIIRemote start

IBM AIX

1.cd /usr/local/sbin

2. ./SIIRemote daemon

Red Hat Linux

1.cd /etc/rc.d/init.d

2../SIIRemote start

Tru-64 UNIX

1.cd/usr/local/sbin

2. ./SIIRemote daemon

- 37 -

Image 37

Contents Minuteman Table of Contents Installation Starting SentryII Services Installing the UPS Interface Cable InstallationIntroduction System RequirementsFrom the Windows Quick Launch Toolbar Starting SentryII ServicesUninstall Procedure Connect to ServiceNovell Netware Connecting to UPS UPS connected successfully Connect to Service Unix HP-UX Connect to Service User Management ConfigurationServer Settings UPS Configuration Event Action Event ConfigurationPaging Page Snmp Trap LoggingEmail Notification BroadcastingUPS and/or Operating System Shutdown Run a System Command Page Meter MonitoringIdentification Input BatteryOutput View Graphic AlarmPage Scheduling UPS Control OptionsControl ScheduleData & Event Logging Log ConfigurationPage View Data Log View Event Log Sentryii RemoteWindows Client InstallationUser Management on Novell Netware ClientUser Management on Unix Client User Management on HP-UX