• | Server Address | The SentryII Server’s IP address. |
• | Server Port | The API port number of the SentryII Server. (See Server Settings on page 13) |
• | Username | The default is admin. This setting must coincide with the defined SentryII users list. (See |
|
| User Management on page 13) |
• | Password | The default is admin. This setting must coincide with the defined SentryII passwords list. |
|
| (See User Management on page 13) |
• | On Battery Shutdown | The amount of time in seconds, after the event occurs, before the Remote Client will be |
|
| shutdown. If the event is removed before the delay time is reached, the action will be |
|
| cancelled. (See UPS and/or Operating System Shutdown on page 20) |
• | Low Battery Shutdown | The amount of time in seconds, after the event occurs, before the Remote Client will be |
|
| shutdown. (See UPS and/or Operating System Shutdown on page 20) |
NOTE: All Remote clients need to be configured to shutdown before the SentryII Server.
Starting SentryII Services
If, at the end of the installation, you selected to start SentryII, then SentryII should be running. If not, to start SentryII, perform the following steps:
•Windows 95/98/ME
1.Click the Windows Start button and select Programs / SentryII / SIIRemote.
2.SentryII Remote is a hidden service and may only be seen by pressing
•Windows NT/2000/XP
1.Start the Windows Services application.
2.From the Windows Start Menu, select the Settings menu, and then select the Control Panel menu.
3.Select the Administrative Tools folder, and then select the Services application.
4.Locate the SentryII Remote service in the services list.
5.Right click SentryII Remote and select Start from the popup menu.
Novell Netware Client
Installation
Step 1. The SentryII Remote must be installed from a Windows client computer. the SentryII Server installation. (see Novell Netware Install Procedure
This should be done in exactly the same manner as page 7)
- 33 -