Pentair 8 and 4 important safety instructions Installing Valve Actuators

Page 22

16

Installing Valve Actuators

For shared equipment systems there are two motorized valve actuators (CVA-24T) included with the EasyTouch kit.

To install a valve actuator:

1.Remove the valve handle/cover four screws, indicated with arrows on the valve cover.

2.Mount the actuator on the valve. Optional: Mount the valve handle onto the actuator as shown below.

3.Secure the actuator with the provided screws.

4.At the EasyTouch load center, route the cable up through the low voltage raceway to the motherboard.

5.Connect the valve actuator cable plug into the INTAKE (suction) or RETURN three-pin sockets on right side of the motherboard (for more information, see Item 2 and 3 of Plumbing requirements on page 3). For motherboard connection details, refer to “EasyTouch Motherboard Connections,” on page 13. For wiring details, refer to “EasyTouch System Wiring Diagram,” on page 23.

Note: If applicable, mount the auxiliary valve actuators and plug it into the VLV A and VLV B 3-pin sockets. If solar heating is being used, plug the solar valve actuators into VLV A. Excess cable can be coiled in the EasyTouch load center low voltage raceway. Do not coil the wire in upper low voltage compartment.

Screw

Valve

Screw

Screw

Actuator

EasyTouch Load Center Installation Guide

Page 21 Page 23
Image 22
Page 21 Page 23
Contents EasyTouch 8 520583 Rev B 12/09/05 Contents Read and Follow all Safety Instructions Important NoticeImportant Safety Precautions General Installation Information Technical SupportEasyTouch Accessory Equipment EasyTouch 8 and 4 Pool and Spa Control System Kit ContentsAbout this manual EasyTouch System Installation Steps Summary Required ToolsPlumbing Requirements Equipment Location Recommended Hydraulic Schematic for Single Body System EasyTouch Load Center High Voltage Connections EasyTouch Load Center LocationTemperature sensors Preparing the EasyTouch Load Center Enclosure Mounting the EasyTouch Load Center Removing Electrical Conduit Knockouts Installing Conduit and Wire to the EasyTouch Load Center Installing Conduit and Wire to the EasyTouch Load Center EasyTouch Motherboard Connections Accessing the EasyTouch Motherboard Installing Auxiliary Relays Installing Valve Actuators Ambient Air Temperature Freeze Protection Sensor Installing and Connecting Temperature SensorsWater Temperature Sensor Solar Temperature Sensor OptionalConnecting the Heater Thermostat Connecting the IntelliChlor Cell Rewiring the IntelliChlor Transformer for 115 VAC Retaining Screws IntelliChlor transformer and filterCheck Electronics EasyTouch System Start-UpEasyTouch System Test Verifying IntelliChlor power EasyTouch System Wiring Diagram Glossary Page 520583 Rev B

8 and 4 specifications

Pentair is renowned for its innovative solutions in water and fluid management, and the Pentair 8 and 4 series are prime examples of their commitment to delivering high-performance products. These series are designed for both residential and commercial applications, showcasing advanced features and technologies that cater to diverse needs.

The Pentair 8 series is known for its robust performance and reliability. It incorporates a powerful motor designed to ensure efficient water circulation and filtration. The 8 series stands out with its user-friendly interface, enabling effortless adjustments and monitoring. The built-in diagnostic features provide real-time feedback, ensuring users can maintain optimal operation without ongoing manual checks. Additionally, the Pentair 8 series emphasizes energy efficiency, reducing power consumption and lowering operational costs.

On the other hand, the Pentair 4 series focuses on compactness and versatility. It is engineered to fit in tight spaces, making it an ideal choice for urban environments where space is a premium. Though smaller in size, the 4 series does not compromise on performance. It utilizes innovative pump technology that maximizes flow while minimizing noise levels. This feature is particularly beneficial for residential applications, where maintaining a quiet environment is essential. The 4 series also includes a range of customizable options, allowing users to tailor the system to their specific requirements.

Both the 8 and 4 series share a commitment to durability and longevity. They are constructed with high-quality materials designed to withstand harsh environmental conditions. This durability reduces the frequency of maintenance and replacement, ultimately providing better value to users.

In summary, the Pentair 8 and 4 series offer a blend of performance, efficiency, and adaptability. Their advanced features, such as energy-efficient motors, user-friendly interfaces, and robust construction, make them suitable for a variety of applications. Whether for residential or commercial use, Pentair continues to set the standard in water management solutions, ensuring both convenience and peace of mind for users. To meet the diverse needs of its clientele, Pentair consistently innovates, ensuring their products remain at the forefront of technology and sustainability.
Top Page Image Contents