Logging On and Logging Off
If there is a user list installed in the unit, you will need to log on to identify yourself before a reading
can be taken. If no users are currently logged on, you can do this by pressing the 
key or
the 
key, which will bring up the
You can log a user off by pressing the 
key and then pressing the 
key. If no PIN code is entered, any user currently logged on is logged off.
The
and press the 
key. If the PIN is recognised, the display will show the user’s name on the screen.
If you pressed the 
key, the product selection screen will be displayed and you can select a
product and process/location as above. If you pressed the 
key, you can now select a
product and process/location in the normal way by pressing the 
key. The process of taking readings is the same as when there is no user list installed in the unit, but the reading data stored will always include the name of the user who was logged onto the ThermoCheck when the reading was recorded.
You can continue taking readings without having to log on for each new product. When you have
finished, remember that you can log off by pressing the 
key and then pressing the 
key. For information regarding users, refer to Chapter 4, Setting Up a User List.
Page 36