To use the ThermoCheck you will need to install the ThermoCheck software (please refer to Chapter 2, Installing the Software for more information about installing the software) onto a computer so that a ThermoCheck can be configured.
To configure a ThermoCheck so that it will be able to take readings a Database will need to be uploaded in to the ThermoCheck (please refer to Chapter 3, Setting Up a Database for further information about creating and uploading a Database to a ThermoCheck). To configure a ThermoCheck so that it records the user (or operator) that recorded the reading along with the reading, a User List will need to be created and uploaded into the ThermoCheck. A User List can be uploaded to a ThermoCheck before, after or at the same time as the Database is uploaded to the ThermoCheck (please refer to Chapter 4, Setting Up a User List, for further information about creating and uploading a user list to a ThermoCheck).
Once a Database and the optional user list has been uploaded to a ThermoCheck, the ThermoCheck is ready to record readings (please refer to Chapter 6, Using the ThermoCheck, for further information about recording readings with a ThermoCheck).
After one or more users have recorded readings, the readings can be downloaded to the computer with the ThermoCheck software so that the readings can be viewed and analysed (please refer to Chapter 7, Accessing Data Stored in the ThermoCheck, for further information about recording readings with a ThermoCheck).
Page 2