Plustek MobileOffice Scanner, D600 Installing and Setting up the Scanner, Installing the Software

Page 10

Installing and Setting up the Scanner

Please follow the step-by-step procedures described below to install the Plustek scanner.

Step 1. Connecting the Scanner to Your Computer

Please make sure the scanner is turned OFF before you plug or unplug the scanner power adapter.

Attention

1.Plug the AC adapter into the scanner’s power receptor.

2.Plug the other end of the AC adapter into a standard AC power outlet.

3.Plug the square end of the included USB cable to the USB port of the scanner.

4.Plug the rectangular end of the USB cable to the USB port on the back of your computer.

Note: If there is another USB device connected to the computer, connect the scanner to an available USB port.

5.If you plan to connect your scanner to a USB hub3, make sure that the hub is connected to the USB port in your computer. Next, connect the scanner to the USB hub.

Note: If you do not have a USB port available, you might need to buy a USB port.

Step 2. Installing the Software

1. If the USB components on your computer are functioning correctly, they will

3The USB hub is not included with the scanner. If using a hub, you are recommended to use a hub with its own external power adapter.

7

Image 10

Contents Installation Usage & Maintenance Troubleshooting Page Table of Contents How to Use This Guide IntroductionSafety Precautions Conventions of This GuideSystem Requirements1 Box Contents2 Scanner’s Features Product InformationSoftware Installation Requirements Chapter I. Installing the ScannerHardware Requirements Connecting the Scanner to Your Computer Installing and Setting up the ScannerInstalling the Software For Windows XP For WindowsFor Windows Vista Testing the Scanner Software Setup Troubleshooting Installing Additional Software Scanning Chapter II. ScanningScanning Button Card Scanning Scan ButtonScanning Methods Document ScanningScanning via Twain Interface Scan within Abbyy FineReader 6.0 Sprint Plus Scan within HotCard BizCard Finder Scanning from Plustek DI Capture Program Configure Button Settings Button Functions Overview Scanning Tips Determining the Correct Amount of ResolutionReducing the File Size of An Images Scanner Connection Appearance StatusCleaning Materials ChapterIII.Clean and MaintenanceClean the Scanner Clean Feed Roller and GlassCalibrating the Scanner Usage & Maintenance Tips Symptom Scanned image looks grainy on the screen Appendix a TroubleshootingScanning Problems Symptom Scanner scans very slowSymptom Unable to save to a floppy diskette Symptom Disk I/O error- message is displayed Symptom How do I cut an image and paste in another program? Symptom Error Scanner not Found that is displayedSymptom How do I save the scanned image in JPG format? Common -How-to- QuestionsPage Appendix B Specifications5 Plustek MobileOffice D600Appendix C Customer Service and Warranty Statement of Limited WarrantyFCC Radio Frequency Statement Page Contacting Plustek