Powercom 3000A &1000AL, 800A, 2000AL, 1500A, ls600A, 2500A, 1250A Maintenance, Computer Interface Port

Page 12

Caution: Use only factory supplied or authorized UPS monitoring cable !

8. Maintenance

1.Keep the unit clean and vacuum the ventilation intake periodically.

2.Wipe with soft loose and damp cloth.

3.Check for loose and bad connections monthly.

4.Never leave the unit on an uneven surface.

5.Position the unit to allow at least 10 cm clearance between the rear panel and the wall. Keep the ventilation intake open.

6.Avoid direct sunlight, rain. And high humidity.

7.Stay away from fire and extremely hot location.

8.Do not stack materials on top of the unit.

9.The unit should not be exposed to corrosive air.

10. The normal operating temperature is 0-40 .

9. Computer Interface Port

The computer interface port has the following characteristics:

The communication port on the back of the UPS may be connected to host computer. This port allows the computer to

monitor the status of the UPS and control the operation of the UPS in some cased. Its major functions normally include

some or all of the following:

to broadcast a warning when power fails.

to close any open file before the battery reserves are exhausted. to turn of the UPS.

Some computers are equipped with a special connector to link with the communication port. In addition, special plug-in

card may be needed. Some computers may need a special UPS monitoring software. Contact your dealer for the details on

the various interface Kits.

The computer interface port has the following characteristics:

1.Pin 5 and 2 are open collector outputs which must be pulled up to a common referenced supply no greater than +40 Vdc.

The transistors are capable of a maximum nonconductive load of 25 mAdc, Use only pin 7 as the common.

Page 11 Page 13
Image 12
Page 11 Page 13
Contents USER’S Manual Important safety instructions Please read this manualTable of contents Safety IntroductionPresentation Front PanelON/TEST button Yellow LED 11 TEL./MODEM Surge ProtectionInstallation Site Wiring Fault Indicators RED LEDComputer Interface Connect external battery pack optional Charge the batteryConnect the telephone/modem lines Connect to UtilityCheck the Site Wiring Fault Indicator Switch onSwitch off OperationShutdown mode Self-testSilence Bttery charge bar graphAlarm Software optionsMaintenance Computer interface port has the following characteristicsComputer Interface Port Battery Replacement Troubleshooting StorageStorage conditions Extended storageBattery Pack Installation BlackSpecifications REDInterface Net Weight 18.0 23.5 26.1 28.4 Nominal Battery 48V 24V Voltage Built-in Charge Current

ls600A, 2000AL, 2500A, 3000A &1000AL, 1000A specifications

The Powercom 3000AL is a high-performance power distribution unit designed to support various electrical applications with exceptional efficiency and reliability. This model is particularly notable for its current capacities of 800A, 1250A, 1500A, and 2000A, offering significant versatility for different operational requirements.

One of the standout features of the Powercom 3000AL is its robust design, which ensures durability and longevity even in challenging environments. Built with high-quality materials, this power distribution unit can withstand extreme temperatures and potential mechanical stress, making it suitable for industrial, commercial, and institutional applications.

In terms of technology, the Powercom 3000AL employs advanced power management capabilities. It includes smart monitoring systems that enable real-time tracking of power consumption and performance. This functionality is invaluable for identifying inefficiencies or potential faults in the power distribution system, allowing for proactive maintenance and minimizing downtime.

Additionally, the unit is equipped with multiple protection features, including overload protection and short circuit protection. These safety measures ensure that the system remains operational under various load conditions while safeguarding connected equipment from damage.

The Powercom 3000AL also features modularity in its design, which allows users to customize and expand their power distribution setup based on evolving needs. This flexibility is essential for businesses that anticipate growth or fluctuations in their power requirements.

Furthermore, the unit incorporates energy-efficient technologies that reduce power loss, contributing to lower operational costs. It is compliant with international energy standards, emphasizing its commitment to sustainability and environmental responsibility.

Overall, the Powercom 3000AL with its capacities of 800A, 1250A, 1500A, and 2000A represents a reliable solution for high-capacity power distribution. Its combination of durable construction, advanced monitoring technology, safety features, and energy efficiency make it a valuable asset in any power management strategy. As industries continue to evolve, the versatility and dependability of the Powercom 3000AL ensure it meets the demands of modern energy usage effectively.
Top Page Image Contents