Powercom ls600A, 800A, 2000AL, 3000A &1000AL, 1500A, 2500A, 1250A Battery Pack Installation, Black

Page 15

 

 

 

 

 

 

 

The UPS is overloaded

Check the UPS’ s load display

 

 

Remove nonessential equipments

Front panel indicators

The UPS has been shut

None. The UPS will restart automatically

flash

down by remote control

when utility power returns.

sequentially

 

 

All indicators are flash

Internal UPS fault

Do not attempt to use the UPS. Turn the

And the UPS emits a

 

UPS off and have it service immediately

Constant tone

 

 

 

 

 

The UPS operates

Building wire error such

Have a qualified electrician correct the building

normally,

as missing ground or hot

wiring

but the site wiring fault

to neutral wire reversal

 

indicator is lit.

 

 

 

The UPS is shut down

None. The UPS will return to normal operation

Low battery light is on

and the battery is

when the power is restored and the battery has

and all LED is off.

discharged and

a sufficient charge.

 

exhausted.

 

 

Weak batteries

The batteries to recharge for at least four hours.

The replace battery light

 

If the problem still exists after recharging,

is lit

 

replace with batteries.

 

 

 

13. Battery Pack Installation

Install up to 8 battery packs per xxxA(L) model UPS following the instruction below.

1

2

3

 

 

BLACK

Page 14 Page 16
Image 15
Page 14 Page 16
Contents USER’S Manual Please read this manual Important safety instructionsTable of contents Introduction SafetyPresentation Front PanelON/TEST button 11 TEL./MODEM Surge Protection Yellow LEDInstallation Site Wiring Fault Indicators RED LEDComputer Interface Connect to Utility Connect external battery pack optionalCharge the battery Connect the telephone/modem linesOperation Check the Site Wiring Fault IndicatorSwitch on Switch offBttery charge bar graph Shutdown modeSelf-test SilenceSoftware options AlarmMaintenance Computer interface port has the following characteristicsComputer Interface Port Battery Replacement Extended storage TroubleshootingStorage Storage conditionsBlack Battery Pack InstallationRED SpecificationsInterface Net Weight 18.0 23.5 26.1 28.4 Nominal Battery 48V 24V Voltage Built-in Charge Current

ls600A, 2000AL, 2500A, 3000A &1000AL, 1000A specifications

The Powercom 3000AL is a high-performance power distribution unit designed to support various electrical applications with exceptional efficiency and reliability. This model is particularly notable for its current capacities of 800A, 1250A, 1500A, and 2000A, offering significant versatility for different operational requirements.

One of the standout features of the Powercom 3000AL is its robust design, which ensures durability and longevity even in challenging environments. Built with high-quality materials, this power distribution unit can withstand extreme temperatures and potential mechanical stress, making it suitable for industrial, commercial, and institutional applications.

In terms of technology, the Powercom 3000AL employs advanced power management capabilities. It includes smart monitoring systems that enable real-time tracking of power consumption and performance. This functionality is invaluable for identifying inefficiencies or potential faults in the power distribution system, allowing for proactive maintenance and minimizing downtime.

Additionally, the unit is equipped with multiple protection features, including overload protection and short circuit protection. These safety measures ensure that the system remains operational under various load conditions while safeguarding connected equipment from damage.

The Powercom 3000AL also features modularity in its design, which allows users to customize and expand their power distribution setup based on evolving needs. This flexibility is essential for businesses that anticipate growth or fluctuations in their power requirements.

Furthermore, the unit incorporates energy-efficient technologies that reduce power loss, contributing to lower operational costs. It is compliant with international energy standards, emphasizing its commitment to sustainability and environmental responsibility.

Overall, the Powercom 3000AL with its capacities of 800A, 1250A, 1500A, and 2000A represents a reliable solution for high-capacity power distribution. Its combination of durable construction, advanced monitoring technology, safety features, and energy efficiency make it a valuable asset in any power management strategy. As industries continue to evolve, the versatility and dependability of the Powercom 3000AL ensure it meets the demands of modern energy usage effectively.
Top Page Image Contents