Battery Replacement | Powercom 800A, 2000AL, 3000A &1000AL, 1500A

2.Pin 5 generates a High to Low signal when the battery inside the UPS has less than 5 minutes back up time left.

3.Pin 2 generates a High to Low signal when the line is fail.

4.The UPS will shut down when a high RS-232 level is sustained on pin 6 for 0.36 seconds.

5.Pin 9 is also the RS-232 data output.

6.Pin 6 is RS-232 data input (RxD)

NOTE:

1.Switch rating +40V, 0.15A non-inductive.

2.Pin 7 should be connected to ground only.

10. Battery Replacement

Your battery should run any where from 3-5 years before eve needing to be replaced.

Please follow the instructions below for easy battery replacement.

1)Unplug unit from AC power source and disconnect all connected equipment.

2)Disconnect AC power cord from unit..

3)Turn unit upside down and using a phillips screw driver, unscrew the 4 screws holding the top of the unit to the bottom. Put screws in a safe place for reconnection.

4)Holding the top together firmly with the bottom, turn the entire unit right side up.

5)Carefully lift top cover off and place to the side. The connecting wires and electronics will be exposed. Be careful not to touch any inner components when changing the battery.

6)Remove the 2 connecting wires from the battery.

7)You can now easily remove the battery from the unit

Caution: Do not dispose of battery in fire.

Caution: Do not attempt to open the battery.

Caution: The following precautions should be taken when replacing the battery

∨remove watches, rings, etc…

∨use tools with insulated handles

ls600A, 2000AL, 2500A, 3000A &1000AL, 1000A specifications

The Powercom 3000AL is a high-performance power distribution unit designed to support various electrical applications with exceptional efficiency and reliability. This model is particularly notable for its current capacities of 800A, 1250A, 1500A, and 2000A, offering significant versatility for different operational requirements.

One of the standout features of the Powercom 3000AL is its robust design, which ensures durability and longevity even in challenging environments. Built with high-quality materials, this power distribution unit can withstand extreme temperatures and potential mechanical stress, making it suitable for industrial, commercial, and institutional applications.

In terms of technology, the Powercom 3000AL employs advanced power management capabilities. It includes smart monitoring systems that enable real-time tracking of power consumption and performance. This functionality is invaluable for identifying inefficiencies or potential faults in the power distribution system, allowing for proactive maintenance and minimizing downtime.

Additionally, the unit is equipped with multiple protection features, including overload protection and short circuit protection. These safety measures ensure that the system remains operational under various load conditions while safeguarding connected equipment from damage.

The Powercom 3000AL also features modularity in its design, which allows users to customize and expand their power distribution setup based on evolving needs. This flexibility is essential for businesses that anticipate growth or fluctuations in their power requirements.

Furthermore, the unit incorporates energy-efficient technologies that reduce power loss, contributing to lower operational costs. It is compliant with international energy standards, emphasizing its commitment to sustainability and environmental responsibility.

Overall, the Powercom 3000AL with its capacities of 800A, 1250A, 1500A, and 2000A represents a reliable solution for high-capacity power distribution. Its combination of durable construction, advanced monitoring technology, safety features, and energy efficiency make it a valuable asset in any power management strategy. As industries continue to evolve, the versatility and dependability of the Powercom 3000AL ensure it meets the demands of modern energy usage effectively.