Powercom ls600A, 800A, 2000AL, 3000A &1000AL, 1500A, 2500A Presentation, Front Panel, ON/TEST button

Page 5

CAUTION !

∨To reduce the risk of electric shock, disconnect the UPS from the mains supply before installing a computer interface signal cable. Reconnect the power cord only after signaling interconnections have been made.

∨The internal energy source(the battery) cannot be de-energized by the user. The output may be energized when the unit is not connected to a mains supply.

∨The right way to de-energize the UPS properly in an emergency is to move the I/O switch to the OFF position and disconnect the power cord from the mains supply.

∨The socket-outlet shall be installed near the equipment and easily accessible.

∨Attention, hazardous through electric shock. Also with disconnection of this unit the main, hazardous voltage still may be accessible through supply from battery. The battery supply should be therefore disconnected in the plus and minus pole when maintenance of service work inside the UPS is considered.

∨Do not dispose of batteries in a fire, the battery may explore.

∨Do not open or mutilate the battery, released electrolyte is harmful to the skin and eyes.

∨A battery can present a risk of electric shock and high short circuit current. The following precaution should be observed when working on batteries - Remove watches, rings or other metal objects.

- Use tools with insulated handles.

Caution: Risk of electric shock - hazardous live parts inside this unit are energized from the battery supply even when the input AC power is connected.

Caution: Risk of electric shock, do not remove cover. No user serviceable parts inside, Refer servicing to qualified service personnel.

Warning: To reduce the risk of fire, replace only with the same type and rating of fuse.

Warning: To reduce the risk of fire or electric shock, install in temperature and humidity controlled indoor area of conductive contaminants.

3. Presentation

FRONT PANEL

3.1 "ON/TEST" button

With the UPS plugged in, press the ON/TEST button to turn on the UPS and

Page 4 Page 6
Image 5
Page 4 Page 6
Contents USER’S Manual Please read this manual Important safety instructionsTable of contents Introduction SafetyON/TEST button PresentationFront Panel 11 TEL./MODEM Surge Protection Yellow LEDComputer Interface InstallationSite Wiring Fault Indicators RED LED Charge the battery Connect external battery pack optionalConnect the telephone/modem lines Connect to UtilitySwitch on Check the Site Wiring Fault IndicatorSwitch off OperationSelf-test Shutdown modeSilence Bttery charge bar graphSoftware options AlarmComputer Interface Port MaintenanceComputer interface port has the following characteristics Battery Replacement Storage TroubleshootingStorage conditions Extended storageBlack Battery Pack InstallationRED SpecificationsInterface Net Weight 18.0 23.5 26.1 28.4 Nominal Battery 48V 24V Voltage Built-in Charge Current

ls600A, 2000AL, 2500A, 3000A &1000AL, 1000A specifications

The Powercom 3000AL is a high-performance power distribution unit designed to support various electrical applications with exceptional efficiency and reliability. This model is particularly notable for its current capacities of 800A, 1250A, 1500A, and 2000A, offering significant versatility for different operational requirements.

One of the standout features of the Powercom 3000AL is its robust design, which ensures durability and longevity even in challenging environments. Built with high-quality materials, this power distribution unit can withstand extreme temperatures and potential mechanical stress, making it suitable for industrial, commercial, and institutional applications.

In terms of technology, the Powercom 3000AL employs advanced power management capabilities. It includes smart monitoring systems that enable real-time tracking of power consumption and performance. This functionality is invaluable for identifying inefficiencies or potential faults in the power distribution system, allowing for proactive maintenance and minimizing downtime.

Additionally, the unit is equipped with multiple protection features, including overload protection and short circuit protection. These safety measures ensure that the system remains operational under various load conditions while safeguarding connected equipment from damage.

The Powercom 3000AL also features modularity in its design, which allows users to customize and expand their power distribution setup based on evolving needs. This flexibility is essential for businesses that anticipate growth or fluctuations in their power requirements.

Furthermore, the unit incorporates energy-efficient technologies that reduce power loss, contributing to lower operational costs. It is compliant with international energy standards, emphasizing its commitment to sustainability and environmental responsibility.

Overall, the Powercom 3000AL with its capacities of 800A, 1250A, 1500A, and 2000A represents a reliable solution for high-capacity power distribution. Its combination of durable construction, advanced monitoring technology, safety features, and energy efficiency make it a valuable asset in any power management strategy. As industries continue to evolve, the versatility and dependability of the Powercom 3000AL ensure it meets the demands of modern energy usage effectively.
Top Page Image Contents