Magnavox G43TWINS-FULLHD user manual Chassis Fan Connector

Page 29

System Panel Header

(9-pin PANEL1)

(see p.12 No. 10)

1

PLED+

PLED-

PWRBTN#

GND

DUMMY RESET#

GND HDLED-

HDLED+

This header accommodates several system front panel functions.

Chassis Speaker Header

1

(4-pin SPEAKER 1)

(see p.12 No. 18)

SPEAKER DUMMY

DUMMY +5V

Please connect the chassis speaker to this header.

Chassis Fan Connector

(3-pin CHA_FAN1)

GND

+12V

(see p.12 No. 9)

CHA_FAN_SPEED

 

Please connect a chassis fan cable to this connector and match the black wire to the ground pin.

CPU Fan Connector

(4-pin CPU_FAN1)

FAN_SPEED_CONTROL

CPU_FAN_SPEED

(see p.12 No. 33)

+12V

GND

4

3

2

1

Please connect a CPU fan cable to this connector and match the black wire to the ground pin.

Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin CPU fan still can work successfully even without the fan speed control function. If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this motherboard, please connect it to Pin 1-3.

Pin 1-3 Connected

3-Pin Fan Installation

ATX Power Connector

12

24

Please connect an ATX power

 

(24-pin ATXPWR1)

 

 

supply to this connector.

 

(see p.12, No. 6)

 

 

 

 

 

 

 

 

 

1

13

 

 

 

 

 

 

 

 

 

 

 

Though this motherboard provides 24-pin ATX power connector, 12

 

 

24

 

 

 

 

it can still work if you adopt a traditional 20-pin ATX power supply.

 

 

 

 

 

To use the 20-pin ATX power supply, please plug your

 

 

 

 

 

power supply along with Pin 1 and Pin 13.

 

 

 

 

 

 

 

 

20-Pin ATX Power Supply Installation

1

 

 

13

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ATX 12V Power Connector

(4-pin ATX12V1)

(see p.12 No. 1)

Please connect an ATX 12V power supply to this connector.

2 9

Image 29
Contents G43Twins-FullHD Disclaimer Copyright NoticeContents Software Support Introduction Package ContentsSpecifications Bios Feature ConnectorUnique Feature Rear Panel I/OFCC, CE, Whql CertificationsPage CPU DVD ATXPWR1 Motherboard LayoutTable for Audio Output Connection ASRock GLAN8CH I/OASRock DVIDisplayPort Card Specifications Screw Holes Pre-installation PrecautionsCPU Installation Page Installation of CPU Fan and Heatsink DDR3A1 DDR3B1 Installation of Memory Modules DimmInstalling a Dimm Pcie slots Installing an expansion cardExpansion Slots PCI and PCI Express Slots DisplayPort DVI-D port Installation of ASRock DVIDisplayPort CardPCIE2 slot Hdcp Function What is HDCP?PS2USBPWR1 Jumpers SetupFSB1066 / DDR2 IDE1 Onboard Headers and ConnectorsUSB 2.0 Headers Internal Audio Connectors Chassis Fan Connector Western Digital Sataii Hard Disk Setup GuideHot Plug Function for Sata / Sataii HDDs What is Hot Plug Function?Points of attention, before you process the Hot Plug Sata / Sataii HDD Hot Plug Feature and Operation GuideHow to Hot Unplug a Sata / Sataii HDD How to Hot Plug a Sata / Sataii HDDMake a Sata / Sataii Driver Diskette Driver Installation GuideUsing Sata / Sataii HDDs with NCQ function Set Up Bios Install Windows VistaTM / VistaTM 64-bit OS on your system Using Sata / Sataii HDDs without NCQ function Set up BiosInstall Windows 2000 / XP / XP 64-bit OS on your system Untied Overclocking Technology Bios Menu Bar Main Screen Navigation KeysSmart Screen Overclock Mode CPU ConfigurationCPU Configuration Overclock Mode AutoCPU Frequency MHz Boot Failure GuardPcie Frequency MHz Spread SpectrumChipset Configuration Dram tRAS Dram tCLDram tRP Dram tRCDDram CH1 tRD Phase Adjust Dram CH0 tRD Phase AdjustPavp Mode Dvmt Mode SelectFront Panel OnBoard HD AudioCD-In OnBoard LanAcpi Configuration Sataii Configuration IDE ConfigurationSataii Configuration Enhanced Acpi Hpet TableLBA/Large Mode IDE Device ConfigurationPIO Mode Block Multi-Sector TransferPCIPnP Configuration Super IO Configuration Floppy ConfigurationOnBoard Floppy Controller Serial Port AddressUSB Controller Enabled USB ConfigurationUSB Controller USB 2.0 SupportHardware Health Event Monitoring Screen Target CPU TemperatureCPU Quiet Fan Target Fan SpeedBoot Settings Configuration Boot ScreenFull Screen Logo AddOn ROM DisplayBoot From Onboard LAN Boot LogoBoot Up Num-Lock Security ScreenExit Screen Would you like to save current setting user defaults?Discard Changes and Exit Discard ChangesSupport CD Information Install Operating SystemRunning The Support CD Drivers Menu