Magnavox G43TWINS-FULLHD user manual Sataii Hard Disk Setup Guide, Western Digital

Page 30

Serial port Header

(9-pin COM1)

(see p.12 No.21)

1

RRXD1

DDTR#1

DDSR#1 CCTS#1

RRI#1

RRTS#1

GND

TTXD1 DDCD#1

This COM1 header

supports a serial port module.

2.10 SATAII Hard Disk Setup Guide

Before installing SATAII hard disk to your computer, please carefully read below SATAII hard disk setup guide. Some default setting of SATAII hard disks may not be at SATAII mode, which operate with the best performance. In order to enable SATAII function, please follow the below instruction with different vendors to correctly adjust your SATAII hard disk to SATAII mode in advance; otherwise, your

SATAII hard disk may fail to run at SATAII mode.

Western Digital

7

5

3

1

8

6

4

2

If pin 5 and pin 6 are shorted, SATA 1.5Gb/s will be enabled.

On the other hand, if you want to enable SATAII 3.0Gb/s, please remove the jumpers from pin 5 and pin 6.

SAMSUNG

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

5

3

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8

6

4

2

 

 

 

If pin 3 and pin 4 are shorted, SATA 1.5Gb/s will be enabled.

On the other hand, if you want to enable SATAII 3.0Gb/s, please remove the jumpers from pin 3 and pin 4.

HITACHI

Please use the Feature Tool, a DOS-bootable tool, for changing various ATA features. Please visit HITACHI’s website for details: http://www.hitachigst.com/hdd/support/download.htm

The above examples are just for your reference. For different SATAII hard disk products of different vendors, the jumper pin setting methods may not be the same. Please visit the vendors’ website for the updates.

3 0

Image 30
Contents G43Twins-FullHD Copyright Notice DisclaimerContents Software Support Package Contents IntroductionSpecifications Unique Feature ConnectorBios Feature Rear Panel I/OCertifications FCC, CE, WhqlPage CPU DVD Motherboard Layout ATXPWR1ASRock GLAN8CH I/O Table for Audio Output ConnectionASRock DVIDisplayPort Card Specifications Pre-installation Precautions Screw HolesCPU Installation Page Installation of CPU Fan and Heatsink Installation of Memory Modules Dimm DDR3A1 DDR3B1Installing a Dimm Installing an expansion card Expansion Slots PCI and PCI Express SlotsPcie slots Installation of ASRock DVIDisplayPort Card PCIE2 slotDisplayPort DVI-D port What is HDCP? Hdcp FunctionJumpers Setup PS2USBPWR1FSB1066 / DDR2 Onboard Headers and Connectors IDE1USB 2.0 Headers Internal Audio Connectors Chassis Fan Connector Sataii Hard Disk Setup Guide Western DigitalWhat is Hot Plug Function? Hot Plug Function for Sata / Sataii HDDsSata / Sataii HDD Hot Plug Feature and Operation Guide Points of attention, before you process the Hot PlugHow to Hot Plug a Sata / Sataii HDD How to Hot Unplug a Sata / Sataii HDDDriver Installation Guide Using Sata / Sataii HDDs with NCQ function Set Up BiosMake a Sata / Sataii Driver Diskette Using Sata / Sataii HDDs without NCQ function Set up Bios Install Windows 2000 / XP / XP 64-bit OS on your systemInstall Windows VistaTM / VistaTM 64-bit OS on your system Untied Overclocking Technology Bios Menu Bar Navigation Keys Main ScreenSmart Screen CPU Configuration CPU ConfigurationOverclock Mode Overclock Mode AutoPcie Frequency MHz Boot Failure GuardCPU Frequency MHz Spread SpectrumChipset Configuration Dram tRP Dram tCLDram tRAS Dram tRCDPavp Mode Dram CH0 tRD Phase AdjustDram CH1 tRD Phase Adjust Dvmt Mode SelectCD-In OnBoard HD AudioFront Panel OnBoard LanAcpi Configuration Sataii Configuration Enhanced IDE ConfigurationSataii Configuration Acpi Hpet TablePIO Mode IDE Device ConfigurationLBA/Large Mode Block Multi-Sector TransferPCIPnP Configuration OnBoard Floppy Controller Floppy ConfigurationSuper IO Configuration Serial Port AddressUSB Controller USB ConfigurationUSB Controller Enabled USB 2.0 SupportCPU Quiet Fan Target CPU TemperatureHardware Health Event Monitoring Screen Target Fan SpeedFull Screen Logo Boot ScreenBoot Settings Configuration AddOn ROM DisplayBoot Up Num-Lock Boot LogoBoot From Onboard LAN Security ScreenDiscard Changes and Exit Would you like to save current setting user defaults?Exit Screen Discard ChangesRunning The Support CD Install Operating SystemSupport CD Information Drivers Menu