| - Voltage Monitoring: +12V, +5V, +3.3V, CPU Vcore |
|
|
OS | - Microsoft® Windows® 2000 / XP / XP |
| VistaTM |
Certifications | - FCC, CE, WHQL |
* For detailed product information, please visit our website: http://www.asrock.com
WARNING
Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using the third- party overclocking tools. Overclocking may affect your system stability, or even cause damage to the components and devices of your system. It should be done at your own risk and expense. We are not responsible for possible damage caused by overclocking.
CAUTION!
1.About the setting of “Hyper Threading Technology”, please check page 41.
2.This motherboard supports Untied Overclocking Technology. Please read “Untied Overclocking Technology” on page 36 for details.
3.This motherboard supports Dual Channel Memory Technology. Before you implement Dual Channel Memory Technology, make sure to read the installation guide of memory modules on page 19 for proper installation.
4.Please check the table below for the CPU FSB frequency and its
corresponding memory support frequency.
CPU FSB Frequency | Memory Support Frequency |
1333 | DDR2 667, DDR2 800, DDR2 1066, |
| DDR3 800, DDR3 1066 |
1066 | DDR2 667, DDR2 800, DDR2 1066, |
| DDR3 800, DDR3 1066 |
800DDR2 667, DDR2 800, DDR3 800
*DDR2 1066 memory modules will operate in overclocking mode.
*If you adopt a DDR2 1066 memory module on this motherboard, you need to adjust the jumpers. Please refer to page 24 for proper jumper settings.
5.Due to the operating system limitation, the actual memory size may be less than 4GB for the reservation for system usage under Windows® XP and Windows® VistaTM. For Windows® XP
6.The maximum shared memory size is defined by the chipset vendor and is subject to change. Please check Intel® website for the latest information.
7.This motherboard supports three VGA output options:
8