Magnavox G43TWINS-FULLHD Driver Installation Guide, Make a Sata / Sataii Driver Diskette

Page 34

2.14 Driver Installation Guide

To install the drivers to your system, please insert the support CD to your optical drive first. Then, the drivers compatible to your system can be auto-detected and listed on the support CD driver page. Please follow the order from up to bottom side to install those required drivers. Therefore, the drivers you install can work properly.

2.15 Installing Windows® 2000 / XP / XP 64-bit / VistaTM / VistaTM 64-bit Without RAID Functions

If you want to install Windows® 2000 / XP / XP 64-bit / VistaTM / VistaTM 64-bit OS on your SATA / SATAII HDDs without RAID functions, please follow below procedures according to the OS you install.

Since Windows® 2000 AHCI driver is not provided by the chipset vendor, AHCI function is not supported under Windows® 2000.

2.15.1Installing Windows® 2000 / XP / XP 64-bit

Without RAID Functions

If you want to install Windows® 2000 / XP / XP 64-bit OS on your SATA / SATAII HDDs without RAID functions, please follow below steps.

Using SATA / SATAII HDDs with NCQ function

STEP 1: Set Up BIOS.

A. Enter BIOS SETUP UTILITYAdvanced screen IDE Configuration. B. Set “SATAII Configuration” to [Enhanced], and then in the option “Configure

SATAII as”, please set the option to [AHCI].

STEP 2: Make a SATA / SATAII Driver Diskette.

A. Insert the Support CD into your optical drive to boot your system.

B. During POST at the beginning of system boot-up, press <F11> key, and then a window for boot devices selection appears. Please select CD-ROM as the boot device.

C. When you see the message on the screen, “Do you want to generate Serial ATA driver diskette [YN]?”, press <Y>.

D. Then you will see these messages,

Please insert a diskette into the floppy drive. WARNING! Formatting the floppy diskette will lose ALL data in it!

Start to format and copy files [YN]?

Please insert a floppy diskette into the floppy drive, and press <Y>. E. The system will start to format the floppy diskette and copy SATA / SATAII

drivers into the floppy diskette.

3 4

Image 34
Contents G43Twins-FullHD Copyright Notice DisclaimerContents Software Support Package Contents IntroductionSpecifications Unique Feature ConnectorBios Feature Rear Panel I/OCertifications FCC, CE, WhqlPage CPU DVD Motherboard Layout ATXPWR1ASRock GLAN8CH I/O Table for Audio Output ConnectionASRock DVIDisplayPort Card Specifications Pre-installation Precautions Screw HolesCPU Installation Page Installation of CPU Fan and Heatsink Installation of Memory Modules Dimm DDR3A1 DDR3B1Installing a Dimm Expansion Slots PCI and PCI Express Slots Installing an expansion cardPcie slots PCIE2 slot Installation of ASRock DVIDisplayPort CardDisplayPort DVI-D port What is HDCP? Hdcp FunctionJumpers Setup PS2USBPWR1FSB1066 / DDR2 Onboard Headers and Connectors IDE1USB 2.0 Headers Internal Audio Connectors Chassis Fan Connector Sataii Hard Disk Setup Guide Western DigitalWhat is Hot Plug Function? Hot Plug Function for Sata / Sataii HDDsSata / Sataii HDD Hot Plug Feature and Operation Guide Points of attention, before you process the Hot PlugHow to Hot Plug a Sata / Sataii HDD How to Hot Unplug a Sata / Sataii HDDUsing Sata / Sataii HDDs with NCQ function Set Up Bios Driver Installation GuideMake a Sata / Sataii Driver Diskette Install Windows 2000 / XP / XP 64-bit OS on your system Using Sata / Sataii HDDs without NCQ function Set up BiosInstall Windows VistaTM / VistaTM 64-bit OS on your system Untied Overclocking Technology Bios Menu Bar Navigation Keys Main ScreenSmart Screen CPU Configuration CPU ConfigurationOverclock Mode Overclock Mode AutoPcie Frequency MHz Boot Failure GuardCPU Frequency MHz Spread SpectrumChipset Configuration Dram tRP Dram tCLDram tRAS Dram tRCDPavp Mode Dram CH0 tRD Phase AdjustDram CH1 tRD Phase Adjust Dvmt Mode SelectCD-In OnBoard HD AudioFront Panel OnBoard LanAcpi Configuration Sataii Configuration Enhanced IDE ConfigurationSataii Configuration Acpi Hpet TablePIO Mode IDE Device ConfigurationLBA/Large Mode Block Multi-Sector TransferPCIPnP Configuration OnBoard Floppy Controller Floppy ConfigurationSuper IO Configuration Serial Port AddressUSB Controller USB ConfigurationUSB Controller Enabled USB 2.0 SupportCPU Quiet Fan Target CPU TemperatureHardware Health Event Monitoring Screen Target Fan SpeedFull Screen Logo Boot ScreenBoot Settings Configuration AddOn ROM DisplayBoot Up Num-Lock Boot LogoBoot From Onboard LAN Security ScreenDiscard Changes and Exit Would you like to save current setting user defaults?Exit Screen Discard ChangesRunning The Support CD Install Operating SystemSupport CD Information Drivers Menu