Magnavox G43TWINS-FULLHD user manual Chipset Configuration

Intel (R) SpeedStep(tm) tech.

Intel (R) SpeedStep(tm) tech. is Intel’s new power saving technology. Processor can switch between multiple frequency and voltage points to enable powersavings. The default value is [Auto]. Configuration options: [Auto], [Enabled] and [Disabled]. If you install Windows® XP and select [Auto], you need to set the “Power Schemes” as “Portable/Laptop” to en- able this function. If you install Windows® VistaTM and want to enable this function, please set this item to [Enabled]. This item will be hidden if the current CPU does not support Intel (R) SpeedStep(tm) tech..

Please note that enabling this function may reduce CPU voltage and lead to system stability or compatibility issue with some power supplies. Please set this item to [Disable] if above issue occurs.

3.4.2 Chipset Configuration

BIOS SETUP UTILITY

Advanced

Chipset Configuration

Memory Remap Feature	[Disabled]
DRAM Frequency	[Auto]
Flexibility Option	[Disabled]
Standard Memory Info : 4-15-5-5-5-26-3-3-3
DRAM tCL	[Auto]
DRAM tRAS	[Auto]
DRAM tRP	[Auto]
DRAM tRCD	[Auto]
DRAM tWR	[Auto]
DRAM tRFC	[Auto]
DRAM tWTR	[Auto]
DRAM tRRD	[Auto]
DRAM tRTP	[Auto]
Advanced Memory Info : 18-18-9-9-0-0
DRAM CH0 RCOMP ODT	[Auto]
DRAM CH1 RCOMP ODT	[Auto]
DRAM CH0 tRD	[Auto]
DRAM CH1 tRD	[Auto]

ENABLE: Allow remapping of overlapped PCI memory above the total physical memory.

DISABLE: Do not allow remapping of memory.

	Select Screen
	Select Item
+ -	Change Option
F1	General Help
F9	Load Defaults
F10	Save and Exit
ESC	Exit

v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.

Memory Remap Feature

Use this item to enable or disable memory remap feature. Configuration options: [Enabled] and [Disabled]. The default value is [Disabled].

DRAM Frequency

If [Auto] is selected, the motherboard will detect the memory module(s) in- serted and assigns appropriate frequency automatically. You may select [333MHz (DDR2 667)], [400MHz (DDR2 800)] or [533MHz (DDR2 1066)] for DDR2 memory modules, or select [400MHz (DDR3 800)] or [533MHz (DDR3 1066)] for DDR3 memory modules. The configuration options depend on the CPU and memory module you adopt on this motherboard. Please refer to page 8 for the CPU FSB frequency and its corresponding memory support frequency.

Flexibility Option

The default value of this option is [Disabled]. It will allow better tolerance for memory compatibility when it is set to [Enabled].

Standard Memory Info : 4-15-5-5-5-26-3-3-3

4 2