Loading Different Types of Paper
To load: | Proceed as follows: |
Plain paper, coated | • Load the media vertically against the right side of the paper support and with |
paper, glossy paper, | the print side facing up. |
photo paper, | • Squeeze and slide the paper guide against the left edge of the paper. |
greeting cards, | note: Load letterhead paper with the top of the letterhead entering the printer |
index cards, post | first and facing up. |
cards, envelopes, |
|
transparencies, |
|
| |
Banner paper | • Remove all paper from the paper support. |
| • Insert the leading edge of the banner paper vertically into the printer against |
| the right side of the paper support and with the print side facing up. |
| note: Do not use perforated |
| • Squeeze and slide the paper guide against the left edge of the banner paper. |
• Read the instructions on the transfer package. | |
transfers | • Load the blank side of the |
| the paper support and facing up. |
| • Squeeze and slide the paper guide against the left edge of the transfer. |
TURNING YOUR PRINTER ON AND OFF
Turning On Your Printer
Press the ON/OFF button on the right of the front panel.
note: Before pressing the ON/OFF button, make sure that the printer’s power cord is plugged into a grounded electrical outlet. See the Setup Diagram, included in the printer’s box, for information on how to setup your printer.
After pressing the ON/OFF button, the printer executes a series of autodiagnostic tests aimed at detecting any possible system malfunction. Any error detected at this time will be signalled by the front panel, or by the personal computer if connected to the printer. See "Meaning of the LED Indicators on the Front Panel" for the corrective actions in case any error is detected.
Upon the successful completion of the autodiagnostic phase, certain buttons on the front panel will illuminate to indicate the functions that are available according to the current printer configuration (whether or not it is connected to a computer or to a digital camera).
When the printer is not connected to a computer, the following indicators or buttons are illuminated:
10CHAPTER 1